View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0000783 | T99X171.00 SKB Eagle | SW | public | 2019-10-14 15:34 | 2021-12-23 17:23 |
| Reporter | Assigned To | (SW) Jerry Lin | Due Date | ||
| Priority | normal | Severity | s2-severe | Reproducibility | have not tried |
| Status | closed | Resolution | not a bug | ||
| Summary | 0000783: [common] Could you check a supporting status of downloading NTFS file system of USB memory stick? | ||||
| Description | hi Kerwin as taking in webchat, please check below . My USB stick only can update for new FW on FAT32 file system. if i changed a filesystem as NTFS, I can't update new FW in USB. a size of USB memory is 64GB. Please let me know our current system can support this feature on NTFS file system. Additionally if we can support it on NTFS file system, let me know if we should consider a size of USB memory stick. Thanks. | ||||
| Tags | No tags attached. | ||||
| Attach Tags | |||||
| User List |
(ALTech) SY Yoon |
|---|
|
|
Hi all, I attached log files. Normal operated USB F/S : FAT32 Not Updated USB F/S : NTFS USB Manufacturer : Transcend USB Size : 8GB But I can upgrade NTFS with press CH UP/DOWN key at the same time. It is forced upgrade mode. I'm not sure it is related to SW Update function or Android. Please check. CAPTURE_error.TXT (108,795 bytes)
G12A:BL:0253b8:61aa2d;FEAT:F2F939B2:32060;POC:F;RCY:0;EMMC:0;READ:0;0.0;0.0;
bl2_stage_init 0x01
bl2_stage_init 0x81
hw id: 0x0000 - pwm id 0x01
bl2_stage_init 0xc1
bl2_stage_init 0x02
L0:0000037f
L1:00000701
L2:00008067
L3:04000000
S1:00000000
B2:00032060
B1:f2f939b2
TE: 415738
BL2 Built : 10:46:59, Jan 14 2019. g12a g152d217 - guotai.shen@droid11-sz
Board ID = 1
Set cpu clk to 24M
Set clk81 to 24M
CPU clk: 1200 MHz
Set clk81 to 166.6M
eMMC boot @ 0
sw8 s
sd/emmc cmd 8 arg 0x00000000 status a1ff3000
OTP_ARB=00000001
DDR driver_vesion: LPDDR4_PHY_V_0_1_11 build time: Jan 14 2019 10:46:56
board id: 1
Load FIP HDR from eMMC, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
fw parse done
Load ddrfw from eMMC, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
Load ddrfw from eMMC, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
PIEI prepare done
Cfg max: 5, cur: 1. Board id: 255. Force loop cfg
DDR4 probe
ddr clk to 1320MHz
Load ddrfw from eMMC, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of read enable training
INFO : End of fine write leveling
INFO : End of read dq deskew training
INFO : End of MPR read delay center optimization
INFO : End of Write leveling coarse delay
INFO : End of write delay center optimization
INFO : End of read delay center optimization
INFO : End of max read latency training
INFO : Training has run successfully!
1D training succeed
Load ddrfw from eMMC, src: 0x00020200, des: 0xfffd0000, size: 0x0000c000, part: 0
Check phy result
INFO : End of initialization
INFO : End of 2D read delay Voltage center optimization
INFO : End of 2D write delay Voltage center optimization
INFO : Training has run successfully!
R0_RxClkDly_Margin==82 ps 7
R0_TxDqDly_Margi==106 ps 9
R1_RxClkDly_Margin==0 ps 0
R1_TxDqDly_Margi==0 ps 0
dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0001
ddr scramble enable
2D training succeed
DDR cs0 size: 2048MB
DDR cs1 size: 1024MB
DMC_DDR_CTRL: 0060001cDDR size: 3072MB
cs0 DataBus test pass
cs1 DataBus test pass
cs0 AddrBus test pass
cs1 AddrBus test pass
pre test bdlr_100_average==498 bdlr_100_min==498 bdlr_100_max==498 bdlr_100_cur==498
aft test bdlr_100_average==498 bdlr_100_min==498 bdlr_100_max==498 bdlr_100_cur==498
100bdlr_step_size ps== 491
result report
boot times 0Enable ddr reg access
00000000
emmc switch 3 ok
BL2: rpmb counter: 0x0000001c
00000000
emmc switch 0 ok
Load FIP HDR from eMMC, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
Load BL3X from eMMC, src: 0x0006c200, des: 0x0175c000, size: 0x00114000, part: 0
bl2z: ptr: 0512d330, size: 00001e40
0.0;0.0;M3 CHK:0;cm4_sp_mode 0
MVN_1=0x00000000
MVN_2=0x00000000
[Image: g12a_v1.1.3374-beb5a2a 2019-01-14 10:50:25 guotai.shen@droid11-sz]
OPS=0x40
ring efuse init
28 0b 40 00 01 1e 14 00 00 01 33 35 4b 48 4b 50
[0.017299 Inits done]
secure task start!
high task start!
low task start!
run into bl31
NOTICE: BL31: v1.3(release):e468e53
NOTICE: BL31: Built : 17:24:04, Apr 30 2019
NOTICE: BL31: G12A secure boot!
NOTICE: BL31: BL33 decompress pass
INFO: BL3-2: ATOS-V2.4-211-gc89f4ef #1 Wed Feb 13 08:22:45 UTC 2019 arm
INFO: BL3-2: Chip: G12A Rev: B (28:B - 40:2)
INFO: BL3-2: crypto engine DMA
INFO: BL3-2: secure time TEE
INFO: BL3-2: CONFIG_DEVICE_SECURE 0xb200000e
U-Boot 2015.01-g4008c29 (Oct 11 2019 - 15:20:03)
DRAM: 3 GiB
Relocation Offset is: b6e4d000
spi_post_bind(spifc): req_seq = 0
register usb cfg[0][1] = 00000000b7f406b0
NAND: get_sys_clk_rate_mtd() 269, clock setting 200!
NAND device id: 0 ff ff ff ff ff
No NAND device found!!!
nand init failed: -6
get_sys_clk_rate_mtd() 269, clock setting 200!
NAND device id: 0 ff ff ff ff ff
No NAND device found!!!
nand init failed: -6
MMC: aml_priv->desc_buf = 0x00000000b3e3d710
aml_priv->desc_buf = 0x00000000b3e3fa50
SDIO Port B: 0, SDIO Port C: 1
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 400000
emmc/sd response timeout, cmd8, status=0x1ff2800
emmc/sd response timeout, cmd55, status=0x1ff2800
co-phase 0x3, tx-dly 0, clock 400000
co-phase 0x3, tx-dly 0, clock 40000000
aml_sd_retry_refix[983]:delay = 0x0,gadjust =0x12000
[mmc_startup] mmc refix success
init_part() 297: PART_TYPE_AML
[mmc_init] mmc init success
start dts,buffer=00000000b3e422c0,dt_addr=00000000b3e422c0
get_partition_from_dts() 71: ret 0
parts: 19
00: logo 0000000000800000 1
01: recovery 0000000001800000 1
02: misc 0000000000800000 1
03: dtbo 0000000000800000 1
04: cri_data 0000000000800000 2
05: param 0000000001000000 2
06: boot 0000000001000000 1
set has_boot_slot = 0
07: rsv 0000000001000000 1
08: metadata 0000000001000000 1
09: vbmeta 0000000000200000 1
10: tee 0000000002000000 1
11: vendor 0000000008000000 1
12: odm 0000000000100000 1
13: system 000000005c800000 1
14: product 0000000000100000 1
15: cache 0000000043800000 2
16:factory_setting 0000000001000000 1
17: btv_home 0000000006400000 1
18: data ffffffffffffffff 4
init_part() 297: PART_TYPE_AML
eMMC/TSD partition table have been checked OK!
crc32_s:0x1577dad == storage crc_pattern:0x1577dad!!!
crc32_s:0xee152b83 == storage crc_pattern:0xee152b83!!!
crc32_s:0x7fd3b243 == storage crc_pattern:0x7fd3b243!!!
mmc env offset: 0x4ac00000
In: serial
Out: serial
Err: serial
reboot_mode=cold_boot
[store]To run cmd[emmc dtb_read 0x1000000 0x40000]
_verify_dtb_checksum()-2755: calc 716a9863, store 716a9863
_verify_dtb_checksum()-2755: calc 716a9863, store 716a9863
dtb_read()-2972: total valid 2
update_old_dtb()-2953: do nothing
amlkey_init() enter!
[EFUSE_MSG]keynum is 4
vpu: clk_level in dts: 7
vpu: set clk: 666667000Hz, readback: 666666667Hz(0x100)
vpu: vpu_clk_gate_init_off finish
vpp: vpp_init
vpp: g12a/b osd1 matrix rgb2yuv ..............
vpp: g12a/b osd2 matrix rgb2yuv..............
vpp: g12a/b osd3 matrix rgb2yuv..............
aml_config_dtb 608
aml_config_dtb 638
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
co_phase = <0x00000003>
caps2 = "MMC_CAP2_HS200"
f_max = "��"
status = "disabled"
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND
Net: dwmac.ff3f0000amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
CONFIG_AVB2: avb2
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
wipe_data=successful
wipe_cache=successful
upgrade_step=2
reboot_mode:::: cold_boot
gpio: pin GPIOX_7 (gpio 87) value is 1
gpio: pin GPIOAO_10 (gpio 10) value is 1
gpio: pin GPIOX_5 (gpio 85) value is 1
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
hpd_state=1
edid preferred_mode is 2160p60hz[97]
hdr mode is 1
dv mode is ver:0 len: 0
hdr10+ mode is 0
[OSD]load fb addr from dts:/meson-fb
[OSD]set initrd_high: 0xbf800000
[OSD]fb_addr for logo: 0xbf800000
[OSD]load fb addr from dts:/meson-fb
[OSD]fb_addr for logo: 0xbf800000
[OSD]VPP_OFIFO_SIZE:0xfff01fff
[CANVAS]canvas init
[CANVAS]addr=0xbf800000 width=3840, height=2160
[OSD]osd_hw.free_dst_data: 0,3839,0,2159
[OSD]osd1_update_disp_freescale_enable
cvbs: outputmode[2160p60hz] is invalid
vpp: vpp_matrix_update: 2
set hdmitx VIC = 97
config HPLL = 4455000 frac_rate = 1
HPLL: 0x3b0004b9
HPLL: 0x1b0004b9
HPLL: 0xdb0004b9
config HPLL done
j = 9 vid_clk_div = 1
hdmitx phy setting done
hdmitx: set enc for VIC: 353
enc_vpu_bridge_reset[1224]
mode420_half_horizontal_para[2245]
rx version is 2.0 div=40
vpp: hdr_mode = 2
vpp: hdmitx_device.RXCap.hdr_info.hdr_sup_eotf_smpte_st_2084 = 1
gpio: pin GPIOX_7 (gpio 87) value is 1
gpio: pin GPIOAO_10 (gpio 10) value is 1
gpio: pin GPIOX_5 (gpio 85) value is 1
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
gpio: pin GPIOAO_3 (gpio 3) value is 1
Command: bcb uboot-command
Start read misc partition datas!
BCB hasn't any datas,exit!
gpio: pin GPIOX_7 (gpio 87) value is 1
gpio: pin GPIOAO_10 (gpio 10) value is 1
gpio: pin GPIOX_5 (gpio 85) value is 1
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
Hit Enter or space or Ctrl+C key to stop autoboot -- : 1 0
rxon
do_sys_rec_key ret 1
pll tsensor avg: 0x2001, u_efuse: 0x8010
temp1: 38
ddr tsensor avg: 0x201d, u_efuse: 0x802a
temp2: 39
device cool done
CONFIG_SYSTEM_AS_ROOT: systemroot
system_mode: 1
gpio: pin GPIOX_7 (gpio 87) value is 1
gpio: pin GPIOAO_10 (gpio 10) value is 1
gpio: pin GPIOX_5 (gpio 85) value is 1
amlkey_init() enter!
amlkey_init() 71: already init!
[EFUSE_MSG]keynum is 4
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
CONFIG_AVB2: avb2
active_slot: normal
[imgread]secureKernelImgSz=0x918200
avb2: 1
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
ab_suffix is
avb_slot_verify.c:524: DEBUG: Loading vbmeta struct from partition 'vbmeta'.
Verified using testkey
[store]To run cmd[emmc dtb_read 0x00000000b5a9ddf0 0x40000]
dtb_read_shortcut()-2813: short cut in...
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
avb verification: locked = 1, result = 0
ee_gate_off ...
avb2: 1
## Booting Android Image at 0x01080a00 ...
Kernel command line: androidboot.dtbo_idx=0 buildvariant=userdebug
Start read misc partition datas!
info->magic =
info->version_major = 1
info->version_minor = 0
info->slots[0].priority = 15
info->slots[0].tries_remaining = 7
info->slots[0].successful_boot = 0
info->slots[1].priority = 14
info->slots[1].tries_remaining = 7
info->slots[1].successful_boot = 0
info->crc32 = -1075449479
active slot = 0
active_slot is normal
load dtb from 0x1000000 ......
find 1 dtbos
dtbos to be applied: 0
Apply dtbo 0
Loading Kernel Image(COMP_NONE) ... OK
kernel loaded at 0x01080000, end = 0x01983dc8
libfdt fdt_getprop(): FDT_ERR_NOTFOUND
Loading Device Tree to 0000000009fea000, end 0000000009fff6fc ... OK
Starting kernel ...
uboot time: 9482700 us
[ 0.000000@0] Booting Linux on physical CPU 0x0
[ 0.000000@0] Linux version 4.9.113-g0c98e6d-dirty (root@BuildHost) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #37 SMP PREEMPT Fri Oct 11 15:05:44 CST 2019
[ 0.000000@0] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000@0] CPU: div instructions available: patching division code
[ 0.000000@0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000@0] OF: fdt:Machine model: Amlogic
[ 0.000000@0] Reserved memory: created CMA memory pool at 0x05000000, size 36 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
[ 0.000000@0] Reserved memory: created CMA memory pool at 0xbf800000, size 8 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
[ 0.000000@0] Reserved memory: created CMA memory pool at 0x2b400000, size 76 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
[ 0.000000@0] DI reserved memory: created CMA memory pool at 0xb7600000, size 130 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,di, compatible id amlogic, di-mem
[ 0.000000@0] Reserved memory: created CMA memory pool at 0xb4c00000, size 40 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
[ 0.000000@0] Reserved memory: regions without no-map are not yet supported
[ 0.000000@0] Reserved memory: created CMA memory pool at 0x30000000, size 308 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
[ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
[ 0.000000@0] Reserved memory: created CMA memory pool at 0xb0c00000, size 64 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,vdin0_cma, compatible id shared-dma-pool
[ 0.000000@0] Reserved memory: created CMA memory pool at 0xacc00000, size 64 MiB
[ 0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
[ 0.000000@0] cma: Reserved 8 MiB at 0xac400000
[ 0.000000@0] Memory policy: Data cache writealloc
[ 0.000000@0] psci: probing for conduit method from DT.
[ 0.000000@0] psci: PSCIv1.0 detected in firmware.
[ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
[ 0.000000@0] psci: Trusted OS migration not required
[ 0.000000@0] psci: SMC Calling Convention v1.1
[ 0.000000@0] percpu: Embedded 15 pages/cpu @e9b4f000 s32012 r8192 d21236 u61440
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 784642
[ 0.000000@0] Kernel command line: init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xff803000 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 ro rootwait skip_initramfs reboot_mode_android=normal logo=osd0,loaded,0x3d800000 vout=2160p60hz,enable panel_type=lcd_1 hdmitx=,420,12bit hdmimode=2160p60hz frac_rate_policy=1 hdmi_read_edid=1 cvbsmode=576cvbs osd_reverse=0 video_reverse=0 androidboot.enableSystemReset=0 androidboot.selinux=enforcing androidboot.firstboot=0 jtag=disable androidboot.hardware=amlogic androidboot.serialno=4669688001201904000050 mac=ec:5c:68:1d:bb:eb androidboot.mac=ec:5c:68:1d:bb:eb mac_bt=EC:5C:68:1D:BD:7D androidboot.mac_bt=EC:5C:68:1D:BD:7D androidboot.deviceid=BFX-AT100_2019_000000139 dm="1 vroot none ro 1,0 2983048 verity 1 /dev/mmcblk0p18 /dev/mmcblk0p18 4096 4096 372881 372881 sha1 b124d1c54f6c5a448c4f703d2653308c115f75db 5ae789189a69a1261d42cb4b42b9a66ca73cfd50244b1b0abae820742dc9ce62 10 restart_on_corruption
[ 0.000000@0] fb: osd0
[ 0.000000@0] fb: loaded
[ 0.000000@0] fb: 0x3d800000
[ 0.000000@0] vout: 2160p60hz
[ 0.000000@0] vout: enable: 1
[ 0.000000@0] lcd: panel_type: lcd_1
[ 0.000000@0] vout: get hdmimode: 2160p60hz
[ 0.000000@0] hdmitx: hdmitx boot frac_rate_policy: 1
[ 0.000000@0] vout: get cvbsmode: 576cvbs
[ 0.000000@0] vpp_axis_reverse: bootargs is 0
[ 0.000000@0] jtag: jtag select disable
[ 0.000000@0] try to read bt mac from emmc key!
[ 0.000000@0] device-mapper: init: will configure 1 devices
[ 0.000000@0] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000@0] Memory: 2343044K/3144704K available (13312K kernel code, 1174K rwdata, 4664K rodata, 1024K init, 1202K bss, 183164K reserved, 618496K cma-reserved, 1722368K highmem)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000@0] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000@0] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
[ 0.000000@0] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000@0] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000@0] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000@0] .text : 0xc0208000 - 0xc1000000 (14304 kB)
[ 0.000000@0] .init : 0xc1600000 - 0xc1700000 (1024 kB)
[ 0.000000@0] .data : 0xc1700000 - 0xc18258c4 (1175 kB)
[ 0.000000@0] .bss : 0xc1827000 - 0xc1953844 (1203 kB)
[ 0.000000@0] zone:Normal, spaned pages:196352, total:196352
[ 0.000000@0] zone:HighMem, spaned pages:589824, total:786176
[ 0.000000@0] page_trace_pre_work, trace buffer:e9400000, size:300000, used:e9700000, end:e9800000
[ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] Build-time adjustment of leaf fanout to 32.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:16 nr_irqs:16 16
[ 0.000000@0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[ 0.000000@0] g12a_aoclkc_init: register ao clk ok!
[ 0.000000@0] Meson chip version = RevB (28:B - 40:0)
[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[ 0.000000@0] meson_g12a_sdemmc_init: register amlogic sdemmc clk
[ 0.000000@0] meson_g12a_gpu_init: register meson gpu clk
[ 0.000000@0] meson_g12a_media_init: register meson media clk
[ 0.000000@0] meson_g12a_misc_init: register amlogic g12a misc clks
[ 0.000000@0] meson_g12a_misc_init: done.
[ 0.000000@0] g12a_clkc_init initialization complete
[ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000013@0] Switching to timer-based delay loop, resolution 41ns
[ 0.000046@0] meson_bc_timer: mclk->mux_reg =f080c190,mclk->reg =f080e194
[ 0.000721@0] Console: colour dummy device 80x30
[ 0.000740@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000752@0] pid_max: default: 32768 minimum: 301
[ 0.000838@0] Security Framework initialized
[ 0.000847@0] SELinux: Initializing.
[ 0.000914@0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000928@0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001544@0] CPU: Testing write buffer coherency: ok
[ 0.001573@0] ftrace: allocating 42690 entries in 126 pages
[ 0.072809@0] sched-energy: CPU device node has no sched-energy-costs
[ 0.072826@0] CPU0: update cpu_capacity 1024
[ 0.072833@0] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.072854@0] Setting up static identity map for 0x300000 - 0x300058
[ 0.152970@1] CPU1: update cpu_capacity 1024
[ 0.152974@1] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.185025@2] CPU2: update cpu_capacity 1024
[ 0.185029@2] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.217103@3] CPU3: update cpu_capacity 1024
[ 0.217107@3] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.217170@0] Brought up 4 CPUs
[ 0.217195@0] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.217201@0] CPU: All CPU(s) started in SVC mode.
[ 0.218198@0] devtmpfs: initialized
[ 0.244867@0] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.245295@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.245316@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.258363@0] pinctrl core: initialized pinctrl subsystem
[ 0.259422@0] NET: Registered protocol family 16
[ 0.263794@0] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.285173@0] cpuidle: using governor menu
[ 0.285260@0] register canvas platform driver
[ 0.285309@0] register rdma platform driver
[ 0.285346@0] aml_vdac_init: module init
[ 0.289409@0] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.289417@0] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.289685@0] clkmsr: clkmsr: driver init
[ 0.289692@0] codec_mm_module_init
[ 0.289729@0] media_configs_system_init
[ 0.290171@0] pstore: using zlib compression
[ 0.290678@0] console [pstore-1] enabled
[ 0.290861@0] pstore: Registered ramoops as persistent store backend
[ 0.290871@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
[ 0.292838@0] aml_iomap: amlogic iomap probe done
[ 0.293406@0] vpu: driver version: v20180925(7-g12a)
[ 0.293418@0] vpu: load vpu_clk: 666666667Hz(7)
[ 0.293592@0] vpu: clktree_init
[ 0.293652@0] vpu: vpu_probe OK
[ 0.297674@0] clkmsr: msr_clk_reg0=f09c4004,msr_clk_reg2=f09c600c
[ 0.297693@0] clkmsr: msr_ring_reg0=f09c85fc
[ 0.302767@0] aml_vdac_probe:probe start.cpu_id:6,name:meson-g12ab-vdac
[ 0.302958@0] aml_vdac_probe: ok
[ 0.303118@0] canvas_probe reg=ff638000,size=2000
[ 0.303140@0] canvas maped reg_base =f09ca000
[ 0.311611@0] rdma_probe,ver:0, len:8
[ 0.311765@0] rdma_register, rdma_table_addr f09ed000 rdma_table_addr_phy ac440000 reg_buf e8ed8000
[ 0.311774@0] rdma_register success, handle 1 table_size 32768
[ 0.311782@0] set_rdma_handle video rdma handle = 1.
[ 0.312693@0] aml_snd_reg_map[0], reg:ff640000, size:2000
[ 0.312711@0] aml_snd_reg_map[1], reg:ff642000, size:2000
[ 0.312728@0] aml_snd_reg_map[2], reg:ff64a000, size:2000
[ 0.312744@0] aml_snd_reg_map[3], reg:ff642800, size:1800
[ 0.312762@0] aml_snd_reg_map[4], reg:ffd01000, size:1000
[ 0.312770@0] amlogic auge_snd_iomap probe done
[ 0.314652@0] cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12a-cvbsout
[ 0.314674@0] cvbs_out: clk path:0
[ 0.314682@0] cvbs_out: error: failed to get vdac_config
[ 0.314812@0] vout: vout1: register server: cvbs_vout_server
[ 0.314820@0] cvbs_out: register cvbs module server ok
[ 0.314829@0] vout: vout2: register server: cvbs_vout2_server
[ 0.314836@0] cvbs_out: register cvbs module vout2 server ok
[ 0.314845@0] cvbs_out: chrdev devno 263192576 for disp
[ 0.315053@0] cvbs_out: create cdev cvbs
[ 0.315062@0] cvbs_out: cvbsout_probe OK
[ 0.315537@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[ 0.315621@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[ 0.315629@0] codec_mm_probe ok
[ 0.570513@0] vgaarb: loaded
[ 0.570816@0] SCSI subsystem initialized
[ 0.571060@0] usbcore: registered new interface driver usbfs
[ 0.571120@0] usbcore: registered new interface driver hub
[ 0.571187@0] usbcore: registered new device driver usb
[ 0.571292@0] Linux video capture interface: v2.00
[ 0.571374@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.571382@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.571402@0] PTP clock support registered
[ 0.572153@0] secmon: reserve_mem_size:0x2300000
[ 0.572237@0] secmon secmon: assigned reserved memory node linux,secmon
[ 0.572245@0] secmon: can't fine clear_range
[ 0.573854@0] secmon: get page:e9c61000, 5000
[ 0.573868@0] secmon: share in base: 0xc50fe000, share out base: 0xc50ff000
[ 0.573876@0] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[ 0.574451@0] fb: osd_init_module
[ 0.574854@0] fb: viu vsync irq: 52
[ 0.574871@0] fb: viu2 vsync irq: 60
[ 0.574962@0] 0x000000d8:Y=d8,U=0,V=0
[ 0.574970@0] 0x000000d9:Y=d9,U=0,V=0
[ 0.574978@0] 0x000000da:Y=da,U=0,V=0
[ 0.574985@0] 0x000000db:Y=db,U=0,V=0
[ 0.575196@0] fb: osd_rdma_init: rdma_table p=0xac448000,op=0xac448000 , v=0xf09fd000
[ 0.575233@0] rdma_register, rdma_table_addr f0ad9000 rdma_table_addr_phy ac449000 reg_buf e8d73000
[ 0.575241@0] rdma_register success, handle 2 table_size 4096
[ 0.575250@0] fb: osd_rdma_init:osd rdma handle = 2.
[ 0.575265@0] fb: mem_size: 0x800000
[ 0.575272@0] fb: mem_size: 0x1980000
[ 0.575279@0] fb: mem_size: 0x100000
[ 0.575285@0] fb: mem_size: 0x100000
[ 0.575292@0] fb: mem_size: 0x800000
[ 0.575341@0] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[ 0.575350@0] fb: reserved memory base:0xbf800000, size:800000
[ 0.575767@0] vout: error: invalid vinfo1. current vmode is not supported
[ 0.575778@0] fb: init fbdev bpp is:32
[ 0.577181@0] fb: set osd0 reverse as NONE
[ 0.583504@0] fb: osd probe OK
[ 0.584189@0] hdmitx: system: amhdmitx_probe start
[ 0.584198@0] hdmitx: system: Ver: 20181019
[ 0.584225@0] hdmitx: system: hdmitx_device.chip_type : 10
[ 0.584253@0] hdmitx: system: not find product desc
[ 0.584260@0] hdmitx: system: not find match pwr-ctl
[ 0.584290@0] hdmitx: system: not find drm_amhdmitx
[ 0.584313@0] hdmitx: system: hpd irq = 46
[ 0.584405@0] hdmitx: system: hdcp22_tx_skp failed to probe
[ 0.584415@0] hdmitx: system: hdcp22_tx_esm failed to probe
[ 0.584845@0] vout: vout1: register server: hdmitx_vout_server
[ 0.584854@0] vout: vout2: register server: hdmitx_vout2_server
[ 0.585455@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[ 0.585474@0] hdmitx: hdmitx20: Mapped PHY: 0xff634400
[ 0.585492@0] hdmitx: hdmitx20: Mapped PHY: 0xff900000
[ 0.585506@0] hdmitx: hdmitx20: Mapped PHY: 0xff800000
[ 0.585517@0] hdmitx: hdmitx20: Mapped PHY: 0xff63c000
[ 0.585526@0] hdmitx: hdmitx20: Mapped PHY: 0xffd00000
[ 0.585535@0] hdmitx: hdmitx20: Mapped PHY: 0xff608000
[ 0.585544@0] hdmitx: hdmitx20: Mapped PHY: 0xff600000
[ 0.585553@0] hdmitx: hdmitx20: Mapped PHY: 0xffe01000
[ 0.585565@0] hdmitx: hw: alread display in uboot 0x861
[ 0.585591@0] hdmitx: hw: avmute set to 1
[ 0.585600@0] hdmitx: system: fmt_attr 420,12bit
[ 0.585663@0] hdmitx: system: amhdmitx_probe end
[ 0.586494@0] vout: create vout attribute OK
[ 0.586652@0] vout: vout_fops_create OK
[ 0.586662@0] vout: vout1: register server: nulldisp_vout_server
[ 0.586680@0] hdmitx: hdmitx_set_current_vmode[3549]
[ 0.586688@0] hdmitx: system: recalc before 2160p60hz 60 1
[ 0.586697@0] hdmitx: system: recalc after 2160p60hz 2997 50
[ 0.586704@0] hdmitx: alread display in uboot
[ 0.586711@0] vout: init mode 2160p60hz set ok
[ 0.586857@0] vout: aml_tvout_mode_monitor
[ 0.586872@0] vout: aml_vout_probe OK
[ 0.587423@0] chip type:0x28
[ 0.587833@0] NO valid ramdump args:0 0
[ 0.590035@3] Advanced Linux Sound Architecture Driver Initialized.
[ 0.590644@3] Bluetooth: Core ver 2.22
[ 0.590701@3] NET: Registered protocol family 31
[ 0.590709@3] Bluetooth: HCI device and connection manager initialized
[ 0.590724@3] Bluetooth: HCI socket layer initialized
[ 0.590737@3] Bluetooth: L2CAP socket layer initialized
[ 0.590767@3] Bluetooth: SCO socket layer initialized
[ 0.591158@3] NetLabel: Initializing
[ 0.591167@3] NetLabel: domain hash size = 128
[ 0.591174@3] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.591223@3] NetLabel: unlabeled traffic allowed by default
[ 0.592876@0] hdmitx: system: irq 80000004 0
[ 0.595767@3] clocksource: Switched to clocksource arch_sys_counter
[ 0.612944@0] hdmitx: system: irq 80000002 0
[ 0.662700@3] VFS: Disk quotas dquot_6.6.0
[ 0.662770@3] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.673323@3] dtv_dmd:[amldtvdemod..]aml_dtvdemod_init.
[ 0.673340@3] jtag: module init
[ 0.673524@3] jtag: select is configured apao
[ 0.673533@3] jtag: select is replaced by boot param
[ 0.673567@3] jtag: module probed ok
[ 0.673787@3] NET: Registered protocol family 2
[ 0.674273@3] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.674341@3] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.674441@3] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.674511@3] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.674543@3] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.674663@3] NET: Registered protocol family 1
[ 0.676395@3] aml_wifi wifi: [wifi_dev_probe] no interrupt pin
[ 0.676411@3] aml_wifi wifi: [wifi_dev_probe] no power_on_pin
[ 0.676420@3] wifi: power_on_pin_OD = 0;
[ 0.676429@3] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
[ 0.676522@3] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
[ 0.676544@3] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
[ 0.676554@3] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
[ 0.676562@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem 1.579.77.41.9
[ 0.677216@3] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
[ 0.677226@3] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=0
[ 0.677235@3] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=0
[ 0.677244@3] aml_wifi wifi: [wifi_dev_probe] power_on_pin=0
[ 0.677254@3] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
[ 0.677469@3] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
[ 0.681829@3] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[ 0.684866@3] audit: initializing netlink subsys (disabled)
[ 0.684929@3] audit: type=2000 audit(0.640:1): initialized
[ 0.689794@3] workingset: timestamp_bits=30 max_order=20 bucket_order=0
[ 0.699083@2] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.699406@2] exFAT: Version 1.2.9
[ 0.700885@2] Registering sdcardfs 0.1
[ 0.701152@2] ntfs: driver 2.1.32 [Flags: R/O].
[ 0.701459@2] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.702292@2] fuse init (API version 7.26)
[ 0.709547@2] NET: Registered protocol family 38
[ 0.709571@2] Key type asymmetric registered
[ 0.709579@2] Asymmetric key parser 'x509' registered
[ 0.709779@2] bounce: pool size: 64 pages
[ 0.710029@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.710040@2] io scheduler noop registered (default)
[ 0.710048@2] io scheduler deadline registered
[ 0.710076@2] io scheduler cfq registered
[ 0.720367@2] random: fast init done
[ 0.720897@2] random: crng init done
[ 0.741037@0] clear:28400000, free:28400000, tick:148708 us
[ 0.742962@2] loop: module loaded
[ 0.743665@2] zram: Added device: zram0
[ 0.744205@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.745024@2] libphy: Fixed MDIO Bus: probed
[ 0.745284@2] tun: Universal TUN/TAP device driver, 1.6
[ 0.745292@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.746150@2] REG0:Addr = f0ccc540
[ 0.746515@2] meson6-dwmac ff3f0000.ethernet: no reset control found
[ 0.746525@2] stmmac - user ID: 0x11, Synopsys ID: 0x37
[ 0.746533@2] Ring mode enabled
[ 0.746541@2] DMA HW capability register supported
[ 0.746548@2] Normal descriptors
[ 0.746555@2] RX Checksum Offload Engine supported
[ 0.746561@2] COE Type 2
[ 0.746568@2] TX Checksum insertion supported
[ 0.746574@2] Wake-Up On Lan supported
[ 0.746625@2] Enable RX Mitigation via HW Watchdog Timer
[ 0.749758@2] libphy: stmmac: probed
[ 0.749770@2] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 0.749779@2] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[ 0.751074@2] PPP generic driver version 2.4.2
[ 0.751267@2] PPP BSD Compression module registered
[ 0.751277@2] PPP Deflate Compression module registered
[ 0.751301@2] PPP MPPE Compression module registered
[ 0.751309@2] NET: Registered protocol family 24
[ 0.751404@2] usbcore: registered new interface driver asix
[ 0.751490@2] usbcore: registered new interface driver ax88179_178a
[ 0.751545@2] usbcore: registered new interface driver cdc_ether
[ 0.751608@2] usbcore: registered new interface driver net1080
[ 0.751661@2] usbcore: registered new interface driver cdc_subset
[ 0.751713@2] usbcore: registered new interface driver zaurus
[ 0.751895@2] usbcore: registered new interface driver cdc_ncm
[ 0.752825@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.752836@2] ehci-pci: EHCI PCI platform driver
[ 0.752906@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.752931@2] ohci-pci: OHCI PCI platform driver
[ 0.753441@2] usbcore: registered new interface driver cdc_acm
[ 0.753449@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.753519@2] usbcore: registered new interface driver usb-storage
[ 0.753618@2] usbcore: registered new interface driver usbserial
[ 0.753991@2] mousedev: PS/2 mouse device common for all mice
[ 0.754231@2] usbcore: registered new interface driver xpad
[ 0.754364@2] i2c /dev entries driver
[ 0.754596@2] IR NEC protocol handler initialized
[ 0.754604@2] IR RC5(x/sz) protocol handler initialized
[ 0.754612@2] IR RC6 protocol handler initialized
[ 0.754619@2] IR JVC protocol handler initialized
[ 0.754626@2] IR Sony protocol handler initialized
[ 0.754634@2] IR SANYO protocol handler initialized
[ 0.754641@2] IR Sharp protocol handler initialized
[ 0.754649@2] IR MCE Keyboard/mouse protocol handler initialized
[ 0.754656@2] IR XMP protocol handler initialized
[ 0.754737@2] usbcore: registered new interface driver uvcvideo
[ 0.754744@2] USB Video Class driver (1.1.1)
[ 0.754809@2] usbcore: registered new interface driver cx231xx
[ 0.754818@2] md: linear personality registered for level -1
[ 0.755358@2] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.759489@2] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: /dev/block/vbmeta
[ 0.759542@2] Bluetooth: HCI UART driver ver 2.3
[ 0.759552@2] Bluetooth: HCI UART protocol H4 registered
[ 0.759886@2] cpuidle: enable-method property 'psci' found operations
[ 0.760019@2] cpuidle: enable-method property 'psci' found operations
[ 0.760153@2] cpuidle: enable-method property 'psci' found operations
[ 0.760285@2] cpuidle: enable-method property 'psci' found operations
[ 0.761713@2] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.762086@2] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.762456@2] usbcore: registered new interface driver usbhid
[ 0.762465@2] usbhid: USB HID core driver
[ 0.762616@2] ashmem: initialized
[ 0.763536@2] value of voltage_tolerance 0
[ 0.764594@2] cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[ 0.765593@2] meson_cpufreq_probe: Registered platform drive
[ 0.765754@2] ff803000.serial: clock gate not found
[ 0.765795@2] meson_uart ff803000.serial: ==uart0 reg addr = f0ce1000
[ 0.765831@2] ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 36, base_baud = 1500000) is a meson_uart
[ 0.765846@2] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[ 1.127780@0] hdmitx: system: plugin
[ 1.259013@0] hdmitx: edid: EDID Parser:
[ 1.259019@0] hdmitx: edid: get dtd0 vic: 97
[ 1.259022@0] hdmitx: edid: get dtd1 vic: 95
[ 1.259039@0] hdmitx: edid: get dtd2 vic: 16
[ 1.259041@0] hdmitx: edid: find IEEEOUT
[ 1.259063@0] hdmitx: edid: check sum valid
[ 1.259064@0] hdmitx: edid: check sum valid
[ 1.259068@0] hdmitx: edid: update rx hdr info 5 at edid parsing
[ 1.259071@0] hdmitx: edid: check sum valid
[ 1.259072@0] hdmitx: edid: check sum valid
[ 1.259076@0] hdmitx: edid: blk0 raw data
[ 1.259102@0] hdmitx: edid:
[ 1.259102@0] 00ffffffffffff001e6d0677953e0700011d0103803c2278ea3e31ae5047ac27
[ 1.259102@0] 0c50542108007140818081c0a9c0d1c081000101010108e80030f2705a80b058
[ 1.259102@0] 8a0058542100001e04740030f2705a80b0588a0058542100001a000000fd0038
[ 1.259102@0] 3d1e873c000a202020202020000000fc004c472048445220344b0a2020200106
[ 1.259102@0]
[ 1.259102@0]
[ 1.259104@0] hdmitx: edid: blk1 raw data
[ 1.259130@0] hdmitx: edid:
[ 1.259130@0] 020338714d9022201f1203040161605d5e5f230907076d030c002000b83c2000
[ 1.259130@0] 6001020367d85dc401788003e30f0003e305c000e3060501023a801871382d40
[ 1.259130@0] 582c450058542100001e565e00a0a0a029503020350058542100001a000000ff
[ 1.259130@0] 003930314e54424b44593737330a0000000000000000000000000000000000c0
[ 1.259130@0]
[ 1.259130@0]
[ 1.259132@0] hdmitx: system: update physcial size: 600 340
[ 1.259137@0] hdmitx: hw: set audio
[ 1.259141@0] hdmitx: hw: hdmitx tx_aud_src = 0
[ 1.259153@0] hdmitx: fs = 0, cd = 6, tmds_clk = 0
[ 1.259156@0] hdmitx: hw: aud_n_para = 6144
[ 1.259163@0] hdmitx: hw: set channel status
[ 2.599777@0] hdmitx: hdmitx_aud_hpd_plug_handler state:2
[ 3.037765@2] console [ttyS0] enabled
[ 3.041816@3] meson_uart ffd24000.serial: ==uart1 reg addr = f0ce3000
[ 3.047883@3] ffd24000.serial: ttyS1 at MMIO 0xffd24000 (irq = 45, base_baud = 1500000) is a meson_uart
[ 3.058151@0] amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xf0ce5000
[ 3.067518@0] amlogic-new-usb3-v2 ffe09080.usb3phy: set of GPIOC_7(459) as OTG ID pin
[ 3.075145@0] amlogic-new-usb3-v2 ffe09080.usb3phy: ok to acquire gpio
[ 3.081645@0] amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xf0cf1080
[ 3.093163@2] Error: Driver 'meson_reset' is already registered, aborting...
[ 3.099185@2] aml_dma ff63e000.aml_dma: Aml dma
[ 3.104089@2] aml_aes_dma ff63e000.aml_dma:aml_aes: Aml AES_dma
[ 3.109754@2] aml_sha_dma ff63e000.aml_dma:aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 3.118421@2] ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[ 3.123967@2] ge2d: ge2d_init_module
[ 3.127287@2] ge2d: ge2d_dev major:237
[ 3.131024@2] ge2d: clock source clk_ge2d_gate d494cc00
[ 3.136140@2] ge2d: clock clk_ge2d source d494cd00
[ 3.140819@2] ge2d: clock source clk_vapb_0 d494cd40
[ 3.145744@2] ge2d: ge2d init clock is 500000000 HZ, VPU clock is 666666656 HZ
[ 3.152989@2] ge2d: ge2d clock is 499 MHZ
[ 3.156929@2] ge2d: find address resource
[ 3.160915@2] ge2d: map io source 0xff940000,size=65536 to 0xf0e90000
[ 3.167321@2] ge2d: ge2d: pdev=e8e67a00, irq=51, clk=d494cc00
[ 3.173069@2] ge2d: ge2d start monitor
[ 3.176821@0] ge2d: ge2d workqueue monitor start
[ 3.177372@2] amvideom vsync irq: 52
[ 3.178001@2] hdmitx: hdcp: hdmitx_hdcp_init
[ 3.178463@2] vout: vout2: create vout2 attribute OK
[ 3.178573@2] vout: vout2: vout2_fops_create OK
[ 3.178576@2] vout: vout2: register server: nulldisp_vout2_server
[ 3.178587@2] vout: vout2: init mode null set ok
[ 3.178746@2] vout: vout2: clktree_init
[ 3.178839@2] vout: vout2: aml_vout2_probe OK
[ 3.178930@2] DI: di_module_init
[ 3.178935@2] DI: di_module_init: major 511
[ 3.179083@2] DI: di_probe:
[ 3.179113@2] data size: 87672
[ 3.179125@2] di_que_alloc:ok
[ 3.179127@2] di_que_alloc:ok
[ 3.179130@2] di_cfg_top_init_val:
[ 3.179133@2] cfg top begin =0
[ 3.179134@2] di_cfg_top_init_val:finish
[ 3.179137@2] module para top begin =0
[ 3.179143@2] dev_vframe_init finish
[ 3.183576@2] di:rmem:ch[0]:start:0xb7600000, size:68157440MB
[ 3.183578@2] di:rmem:ch[1]:start:0xbb700000, size:68157440MB
[ 3.183580@2] di reveser memory 0xb7600000, size 130MB.
[ 3.183588@2] deinterlace deinterlace: assigned reserved memory node linux,di
[ 3.183609@2] pre_irq:66
[ 3.183615@2] post_irq:67
[ 3.183617@2] DI: di_probe allocate rdma channel 0.
[ 3.183624@2] di:err:di_get_vpu_clkb: get clk vpu error.
[ 3.183627@2] DI: vpu clkb <334000000, 667000000>
[ 3.183661@2] DI:enable vpu clkb.
[ 3.183672@2] 0x000000dc:Y=dc,U=0,V=0
[ 3.183673@2] 0x000000dd:Y=dd,U=0,V=0
[ 3.183676@2] 0x000000de:Y=de,U=0,V=0
[ 3.183677@2] 0x000000df:Y=df,U=0,V=0
[ 3.183679@2] 0x000000e0:Y=e0,U=0,V=0
[ 3.183681@2] 0x000000e1:Y=e1,U=0,V=0
[ 3.183682@2] 0x000000e2:Y=e2,U=0,V=0
[ 3.183684@2] 0x000000e3:Y=e3,U=0,V=0
[ 3.183685@2] 0x000000f0:Y=f0,U=0,V=0
[ 3.183687@2] 0x000000f1:Y=f1,U=0,V=0
[ 3.183692@2] 0x000000f2:Y=f2,U=0,V=0
[ 3.183693@2] 0x000000f3:Y=f3,U=0,V=0
[ 3.183695@2] 0x000000f4:Y=f4,U=0,V=0
[ 3.183696@2] 0x000000f5:Y=f5,U=0,V=0
[ 3.183698@2] 0x000000f6:Y=f6,U=0,V=0
[ 3.183700@2] 0x000000f7:Y=f7,U=0,V=0
[ 3.183704@2] 0x000000f8:Y=f8,U=0,V=0
[ 3.183706@2] 0x000000f9:Y=f9,U=0,V=0
[ 3.183707@2] 0x000000fa:Y=fa,U=0,V=0
[ 3.183709@2] 0x000000fb:Y=fb,U=0,V=0
[ 3.183710@2] 0x000000fc:Y=fc,U=0,V=0
[ 3.183712@2] 0x000000fd:Y=fd,U=0,V=0
[ 3.183716@2] 0x000000fe:Y=fe,U=0,V=0
[ 3.183717@2] 0x000000ff:Y=ff,U=0,V=0
[ 3.183719@2] 0x0000003a:Y=3a,U=0,V=0
[ 3.183721@2] DI: support multi decoding 254~255~58.
[ 3.184016@2] .
[ 3.184016@2] di_probe:ok
[ 3.184078@2] DI: finish
[ 3.184108@2] vdin_drv_init: major 510
[ 3.184485@2] vdin vdin0: assigned reserved memory node linux,vdin0_cma
[ 3.184487@2]
[ 3.184487@2] vdin memory resource done.
[ 3.184491@2] vdin0 cma_mem_size = 64 MB
[ 3.184494@2] vdin0 irq: 49 rdma irq: 2
[ 3.184497@2] no afbce mode found, use normal mode
[ 3.184498@2] no urgent_en found
[ 3.184528@2] get fclk_div5 err
[ 3.184530@2] vdin_drv_probe: vdin cannot get msr clk !!!
[ 3.184550@2] vdin_drv_probe: driver initialized ok
[ 3.184706@2] vdin vdin1: assigned reserved memory node linux,vdin1_cma
[ 3.184707@2]
[ 3.184707@2] vdin memory resource done.
[ 3.184710@2] vdin1 cma_mem_size = 64 MB
[ 3.184713@2] vdin1 irq: 50 rdma irq: 4
[ 3.184715@2] no afbce mode found, use normal mode
[ 3.184716@2] no urgent_en found
[ 3.184738@2] get fclk_div5 err
[ 3.184740@2] vdin_drv_probe: vdin cannot get msr clk !!!
[ 3.184744@2] vdin_debugfs_init only support debug vdin0 1
[ 3.184746@2] vdin_drv_probe: driver initialized ok
[ 3.184859@2] vdin_drv_init: vdin driver init done
[ 3.184863@2] [viuin..]viuin_init_module viuin module init
[ 3.185135@2] [viuin..]viuin_probe probe ok.
[ 3.185540@2] [RX]-hdmirx: hdmirx_init.
[ 3.185542@2] ESM HLD: Initializing...
[ 3.185658@2] tvin_afe: tvafe_drv_init: major 508
[ 3.185883@2] tvin_afe: tvafe_drv_init.
[ 3.186013@2] tvafe_vbi: vbi: vbi_init.
[ 3.186146@2] amlvid:info: amlvideo_init called
[ 3.186147@2] amlvid:info: amlvideo_create_instance called
[ 3.186150@2] amlvid:info: v4l2_dev.name=:amlvideo-000
[ 3.186292@2] amlvideo-000: V4L2 device registered as video10
[ 3.186294@2] amlvid:info: amlvideo_create_instance called
[ 3.186296@2] amlvid:info: v4l2_dev.name=:amlvideo-001
[ 3.186413@2] amlvideo-001: V4L2 device registered as video23
[ 3.186533@2] PPMGRDRV: warn: ppmgr module init func called
[ 3.186635@2] PPMGRDRV: err: ppmgr_driver_probe called
[ 3.186701@2] PPMGRDRV: info: ppmgr_dev major:506
[ 3.186873@2] ppmgr: probe of ppmgr failed with error -22
[ 3.187227@2] ionvideo-000: V4L2 device registered as video13
[ 3.187325@2] ionvideo-001: V4L2 device registered as video14
[ 3.187412@2] ionvideo-002: V4L2 device registered as video15
[ 3.187500@2] ionvideo-003: V4L2 device registered as video16
[ 3.187596@2] ionvideo-004: V4L2 device registered as video17
[ 3.187686@2] ionvideo-005: V4L2 device registered as video18
[ 3.187819@2] ionvideo-006: V4L2 device registered as video19
[ 3.187908@2] ionvideo-007: V4L2 device registered as video20
[ 3.188020@2] ionvideo-008: V4L2 device registered as video21
[ 3.188022@2] ionvid: info: Video Technology Magazine Ion Video
[ 3.188024@2] ionvid: info: Capture Board ver 1.0 successfully loaded
[ 3.188401@2] videosync_create_instance dev_s e8ef9400,dev_s->dev d498e2c0
[ 3.188403@2] videosync_create_instance reg videosync.0
[ 3.188472@2] aml_vecm_init:module init
[ 3.188476@3] videosync_thread started
[ 3.188644@2]
[ 3.188644@2] VECM probe start
[ 3.188873@2] == def_hdr_sdr_mode : hdr_mode=2
[ 3.188908@2] Can't find wb_sel.
[ 3.188909@2] hdr:Can't find cfg_en_osd_100.
[ 3.188913@2] Can't find vlock_en.
[ 3.188914@2] Can't find vlock_mode.
[ 3.188916@2] Can't find vlock_pll_m_limit.
[ 3.188917@2] Can't find vlock_line_limit.
[ 3.188928@2] aml_vecm_probe: ok
[ 3.188965@2] amdolby_vision_init:module init
[ 3.189164@2]
[ 3.189164@2] amdolby_vision probe start & ver: 20181009
[ 3.189168@2]
[ 3.189168@2] cpu_id=2 tvmode=0
[ 3.189278@2] dolby_vision_init_receiver(dvel)
[ 3.189281@2] dolby_vision_init_receiver: dvel
[ 3.189445@2] amdolby_vision_probe: ok
[ 3.190179@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[ 3.190986@2] meson-mmc: >>>>>>>>hostbase f0e83000, dmode
[ 3.191267@2] meson-mmc: emmc: fixdiv calc done: adj = 2d2000
[ 3.227789@2] meson-mmc: meson_mmc_probe() : success!
[ 3.227999@2] amlogic mtd driver init
[ 3.230953@1] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[ 3.231591@1] cectx ff80023c.aocec: cec driver date:Ver 2019/1/7
[ 3.231591@1]
[ 3.231944@1] input: cec_input as /devices/virtual/input/input0
[ 3.232061@1] cectx ff80023c.aocec: not find 'port_num'
[ 3.232066@1] cectx ff80023c.aocec: using cec:0
[ 3.232088@1] cectx ff80023c.aocec: no hdmirx regs
[ 3.232091@1] cectx ff80023c.aocec: no hhi regs
[ 3.232099@1] cectx ff80023c.aocec: not find 'output'
[ 3.232106@1] cec: wake up flag:0
[ 3.235245@1] cectx ff80023c.aocec: irq cnt:2
[ 3.236641@1] cectx ff80023c.aocec: wakeup_reason:0x0
[ 3.243228@1] cectx ff80023c.aocec: cev val1: 0x0;val2: 0x0
[ 3.243259@1] cectx ff80023c.aocec: aml_cec_probe success end
[ 3.243585@1] unifykey: storage in base: 0xc5000000
[ 3.243586@1] unifykey: storage out base: 0xc5040000
[ 3.243588@1] unifykey: storage block base: 0xc5080000
[ 3.243588@1] unifykey: probe done!
[ 3.243932@1] unifykey: no efuse-version set, use default value: -1
[ 3.243933@1] unifykey: key unify config unifykey-num is 16
[ 3.244003@1] unifykey: key unify fact unifykey-num is 16
[ 3.244010@1] unifykey: unifykey_devno: 1f500000
[ 3.244255@1] unifykey: device unifykeys created ok
[ 3.244334@1] unifykey: aml_unifykeys_init done!
[ 3.244402@1] meson ts init
[ 3.244447@1] tsensor id: 0
[ 3.244644@1] tsensor trim info: 0xda008010!
[ 3.244646@1] tsensor hireboot: 0xc0ff2a80
[ 3.244707@1] meson ts init
[ 3.244719@1] tsensor id: 1
[ 3.244784@1] tsensor trim info: 0xda00802a!
[ 3.244786@1] tsensor hireboot: 0xc0ff2a90
[ 3.244970@1] audio_dsp: [dsp]register dsp to char divece(257)
[ 3.245191@1] amaudio: amaudio: driver amaudio init!
[ 3.245617@1] amaudio: amaudio_init - amaudio: driver amaudio succuess!
[ 3.246189@1] sysled: module init
[ 3.246425@1] meson_wdt ffd0f0d0.watchdog: creat work queue for watch dog
[ 3.246661@1] meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[ 3.247183@1] amlogic rfkill init
[ 3.247286@1] enter bt_probe of_node
[ 3.247309@1] not get gpio_en
[ 3.247317@1] power on valid level is high
[ 3.247318@1] bt: power_on_pin_OD = 0;
[ 3.247319@1] bt: power_off_flag = 1;
[ 3.247321@1] dis power down = 0;
[ 3.271961@1] BLASTER Driver Init
[ 3.272374@1] irblaster: probe
[ 3.272925@1] dmc_monitor_probe
[ 3.277890@3] aml_atvdemod_init: OK, atv demod version: V2.04.
[ 3.278014@3] defendkey ff630218.defendkey: Reserved memory is not enough!
[ 3.278026@3] defendkey: probe of ff630218.defendkey failed with error -22
[ 3.278475@1] usbcore: registered new interface driver snd-usb-audio
[ 3.279287@1] aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[ 3.279367@1] aml_codec_T9015 is used by auge chipset, tdmout:1
[ 3.281134@1] asoc debug: aml_audio_controller_probe-115
[ 3.282101@1] aml_card_probe error ret:-517
[ 3.282423@1] aml_tdm_platform_probe, tdm ID = 0
[ 3.282437@1] TDM id 0 i2s2hdmi:0
[ 3.282669@1] aml_tdm_platform_probe, tdm ID = 1
[ 3.282680@1] TDM id 1 i2s2hdmi:0
[ 3.282954@1] aml_tdm_platform_probe, tdm ID = 2
[ 3.282985@1] TDM id 2 samesource_sel:3
[ 3.282987@1] TDM id 2 i2s2hdmi:0
[ 3.283163@1] aml_tdm_platform_probe, tdm ID = 3
[ 3.283174@1] TDM id 3 i2s2hdmi:0
[ 3.283176@1] TDM id 3 lb-src-sel:2
[ 3.283208@1] aml_tdm ff642000.audiobus:tdmlb: aml_tdm_get_pins error!
[ 3.283614@1] aml_spdif_platform_probe, spdif ID = 0
[ 3.283742@1] aml_spdif ff642000.audiobus:spdif: aml_spdif_get_pins error!
[ 3.283905@1] SPDIF id 0 asrc_id:0 auto_asrc:0
[ 3.283971@1] spdifout_play_with_zerodata, spdif id:0 enable:0
[ 3.283974@1] spdif_a fifo ctrl, frddr:0 type:3, 32 bits
[ 3.283982@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[ 3.283987@1] hdmitx: audio: aout notify format CT_PCM
[ 3.283989@1] hdmitx: hw: set audio
[ 3.283991@1] hdmitx: hw: hdmitx tx_aud_src = 0
[ 3.284006@1] hdmitx: fs = 3, cd = 6, tmds_clk = 0
[ 3.284009@1] hdmitx: hw: aud_n_para = 6144
[ 3.284017@1] hdmitx: hw: set channel status
[ 3.284046@1] hdmitx: audio: Audio Type: PCM
[ 3.284048@1] hdmitx: audio: set audio param
[ 3.284051@1] spdif_a is set to enable
[ 3.284058@1] aml_spdif_platform_probe, register soc platform
[ 3.284094@1] aml_spdif_platform_probe, spdif ID = 1
[ 3.284142@1] spdifout_play_with_zerodata, spdif id:1 enable:0
[ 3.284144@1] spdif_b fifo ctrl, frddr:0 type:3, 32 bits
[ 3.284148@1] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[ 3.284153@1] spdif_b is set to enable
[ 3.284158@1] aml_spdif_platform_probe, register soc platform
[ 3.284625@1] default set lane_mask_in as all lanes.
[ 3.284634@1] aml_pdm_platform_probe, register soc platform
[ 3.284852@1] audio_ddr_mngr: 0, irqs toddr 37, frddr 40
[ 3.284854@1] audio_ddr_mngr: 1, irqs toddr 38, frddr 41
[ 3.284855@1] audio_ddr_mngr: 2, irqs toddr 39, frddr 42
[ 3.285250@1] audiolocker_platform_probe
[ 3.285563@1] resample_platform_probe
[ 3.286769@1] GACT probability NOT on
[ 3.286782@1] Mirror/redirect action on
[ 3.286788@1] u32 classifier
[ 3.286789@1] Actions configured
[ 3.286794@1] Netfilter messages via NETLINK v0.30.
[ 3.287049@1] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.287290@1] ctnetlink v0.93: registering with nfnetlink.
[ 3.287895@1] xt_time: kernel timezone is -0000
[ 3.287972@1] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 3.288544@1] IPv4 over IPsec tunneling driver
[ 3.301494@1] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.301665@1] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 3.308686@1] Initializing XFRM netlink socket
[ 3.309094@1] NET: Registered protocol family 10
[ 3.309893@1] mip6: Mobile IPv6
[ 3.309913@1] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.320456@1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.321247@1] NET: Registered protocol family 17
[ 3.321266@1] NET: Registered protocol family 15
[ 3.321290@1] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.321363@3] Bluetooth: RFCOMM TTY layer initialized
[ 3.321371@3] Bluetooth: RFCOMM socket layer initialized
[ 3.321393@3] Bluetooth: RFCOMM ver 1.11
[ 3.321400@3] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.321401@3] Bluetooth: BNEP filters: protocol multicast
[ 3.321408@3] Bluetooth: BNEP socket layer initialized
[ 3.321410@3] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.321415@3] Bluetooth: HIDP socket layer initialized
[ 3.321436@3] l2tp_core: L2TP core driver, V2.0
[ 3.321445@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 3.321447@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 3.321461@3] l2tp_netlink: L2TP netlink interface
[ 3.321496@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 3.321509@3] l2tp_debugfs: L2TP debugfs support
[ 3.321511@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 3.321550@3] NET: Registered protocol family 35
[ 3.321592@3] Key type dns_resolver registered
[ 3.324669@3] Registering SWP/SWPB emulation handler
[ 3.325220@3] registered taskstats version 1
[ 3.332852@3] dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[ 3.345204@2] meson-aml-mmc ffe07000.emmc: divider requested rate 200000000 != actual rate 199999997: ret=0
[ 3.345211@2] meson-mmc: Data 1 aligned delay is 0
[ 3.345214@2] meson-mmc: emmc: clk 199999997 tuning start
[ 3.510534@2] meson-mmc: emmc: rx_tuning_result[0] = 40
[ 3.707085@2] meson-mmc: emmc: rx_tuning_result[1] = 40
[ 3.711425@2] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
[ 3.835653@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.835671@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 3.835985@3] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
[ 3.836027@3] xhci-hcd xhci-hcd.0.auto: irq 29, io mem 0xff500000
[ 3.836669@3] hub 1-0:1.0: USB hub found
[ 3.836692@3] hub 1-0:1.0: 2 ports detected
[ 3.836971@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.836981@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 3.837025@3] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.837525@3] hub 2-0:1.0: USB hub found
[ 3.837543@3] hub 2-0:1.0: 1 port detected
[ 3.838453@3] aml_card_probe error ret:-517
[ 3.840980@2] aml_vrtc rtc: setting system clock to 2015-01-01 00:00:14 UTC (1420070414)
[ 3.841411@2] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[ 3.904462@2] meson-mmc: emmc: rx_tuning_result[3] = 40
[ 3.941608@2] dwc_otg: Core Release: 3.30a
[ 3.941625@2] dwc_otg: Setting default values for core params
[ 3.941639@2] dwc_otg: curmode: 0, host_only: 0
[ 3.953951@2] dwc_otg: Using Buffer DMA mode
[ 3.953955@2] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[ 3.953957@2] dwc_otg: Working on port type = OTG
[ 3.953958@2] dwc_otg: Current port type: SLAVE
[ 3.954095@2] dwc_otg ff400000.dwc2_a: DWC OTG Controller
[ 3.954114@2] dwc_otg ff400000.dwc2_a: new USB bus registered, assigned bus number 3
[ 3.954135@2] dwc_otg ff400000.dwc2_a: irq 31, io mem 0x00000000
[ 3.954759@2] hub 3-0:1.0: USB hub found
[ 3.954781@2] hub 3-0:1.0: 1 port detected
[ 3.955529@2] aml_card_probe error ret:-517
[ 3.955897@3] dwc_otg: Dedicated Tx FIFOs mode
[ 3.956161@2] aml_card_probe error ret:-517
[ 3.956280@3] dwc_otg: using timer detectid change, d493dc00
[ 3.957303@3] aml_card_probe error ret:-517
[ 3.958586@3] meson_cdev probe
[ 3.958598@3] thermal: read gpupp failed
[ 3.958640@3] meson_cdev index: 0
[ 3.958774@3] thermal: read gpupp failed
[ 3.958801@3] meson_cdev index: 1
[ 3.958805@3] cpucore_cooling_register, max_cpu_core_num:4
[ 3.958916@3] meson_cdev index: 2
[ 3.958920@3] thermal: read gpupp failed
[ 3.958937@3] meson_cdev index: 3
[ 3.958971@3] find tzd id: 0
[ 3.959062@3] find tzd id: 0
[ 3.959088@3] meson_cdev probe done
[ 3.959573@3] aml_card_probe error ret:-517
[ 3.959807@3] gxbb_pm: enter meson_pm_probe!
[ 3.959881@3] gxbb_pm: meson_pm_probe done
[ 3.960345@3] aml_card_probe error ret:-517
[ 3.960803@3] ALSA device list:
[ 3.960805@3] No soundcards found.
[ 4.091925@2] meson-mmc: emmc: rx_tuning_result[4] = 40
[ 4.091928@2] meson-mmc: emmc: best_win_start =3, best_win_size =4
[ 4.091932@2] meson-mmc: emmc: sd_emmc_regs->gclock=0x10000345,sd_emmc_regs->gadjust=0x2000
[ 4.115215@2] emmc: new HS200 MMC card at address 0001
[ 4.115800@2] emmc: clock 199999997, 8-bit-bus-width
[ 4.115800@2]
[ 4.115800@2] mmcblk0: emmc:0001 8GTF4R 7.28 GiB
[ 4.115949@2] mmcblk0boot0: emmc:0001 8GTF4R partition 1 4.00 MiB
[ 4.116088@2] mmcblk0boot1: emmc:0001 8GTF4R partition 2 4.00 MiB
[ 4.116218@2] mmcblk0rpmb: emmc:0001 8GTF4R partition 3 512 KiB
[ 4.119967@2] meson-mmc: Enter aml_emmc_partition_ops
[ 4.132886@2] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
[ 4.132888@2] meson-mmc: add_emmc_partition
[ 4.133064@2] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
[ 4.133188@2] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
[ 4.133321@2] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000043800000
[ 4.133457@2] meson-mmc: [mmcblk0p04] env offset 0x00004ac00000, size 0x000000800000
[ 4.133575@2] meson-mmc: [mmcblk0p05] logo offset 0x00004bc00000, size 0x000000800000
[ 4.133682@2] meson-mmc: [mmcblk0p06] recovery offset 0x00004cc00000, size 0x000001800000
[ 4.133822@2] meson-mmc: [mmcblk0p07] misc offset 0x00004ec00000, size 0x000000800000
[ 4.133926@2] meson-mmc: [mmcblk0p08] dtbo offset 0x00004fc00000, size 0x000000800000
[ 4.134057@2] meson-mmc: [mmcblk0p09] cri_data offset 0x000050c00000, size 0x000000800000
[ 4.134173@2] meson-mmc: [mmcblk0p10] param offset 0x000051c00000, size 0x000001000000
[ 4.134280@2] meson-mmc: [mmcblk0p11] boot offset 0x000053400000, size 0x000001000000
[ 4.134462@2] meson-mmc: [mmcblk0p12] rsv offset 0x000054c00000, size 0x000001000000
[ 4.134571@2] meson-mmc: [mmcblk0p13] metadata offset 0x000056400000, size 0x000001000000
[ 4.134679@2] meson-mmc: [mmcblk0p14] vbmeta offset 0x000057c00000, size 0x000000200000
[ 4.134823@2] meson-mmc: [mmcblk0p15] tee offset 0x000058600000, size 0x000002000000
[ 4.134930@2] meson-mmc: [mmcblk0p16] vendor offset 0x00005ae00000, size 0x000008000000
[ 4.135070@2] meson-mmc: [mmcblk0p17] odm offset 0x000063600000, size 0x000000100000
[ 4.135192@2] meson-mmc: [mmcblk0p18] system offset 0x000063f00000, size 0x00005c800000
[ 4.135309@2] meson-mmc: [mmcblk0p19] product offset 0x0000c0f00000, size 0x000000100000
[ 4.135441@2] meson-mmc: [mmcblk0p20] factory_setting offset 0x0000c1800000, size 0x000001000000
[ 4.135552@2] meson-mmc: [mmcblk0p21] btv_home offset 0x0000c3000000, size 0x000006400000
[ 4.135699@2] meson-mmc: [mmcblk0p22] data offset 0x0000c9c00000, size 0x000108400000
[ 4.135718@2] card key: card_blk_probe.
[ 4.135723@2] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
[ 4.135726@2] emmc key: emmc_key_init:205 ok.
[ 4.141601@2] meson-mmc: amlmmc_dtb_init: register dtb chardev
[ 4.141601@2] meson-mmc: calc 716a9863, store 716a9863
[ 4.151040@2] meson-mmc: calc 716a9863, store 716a9863
[ 4.151042@2] meson-mmc: total valid 2
[ 4.151321@2] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
[ 4.151322@2] meson-mmc: Exit aml_emmc_par�[ 5.030377@1] meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[ 5.072017@0] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 5.098804@0] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 5.099600@0] scsi host0: usb-storage 2-1:1.0
[ 5.104637@0] aml_card_probe error ret:-517
[ 5.139772@1] prepare_namespace() wait 79
[ 5.139832@1] md: Waiting for all devices to be available before autodetect
[ 5.145078@1] md: If you don't use raid, use raid=noautodetect
[ 5.155451@1] md: Autodetecting RAID arrays.
[ 5.155470@1] md: Scanned 0 and added 0 devices.
[ 5.159728@1] md: autorun ...
[ 5.162674@1] md: ... autorun DONE.
[ 5.166145@1] device-mapper: init: attempting early device configuration.
[ 5.177481@3] device-mapper: init: adding target '0 2983048 verity 1 /dev/mmcblk0p18 /dev/mmcblk0p18 4096 4096 372881 372881 sha1 b124d1c54f6c5a448c4f703d2653308c115f75db 5ae789189a69a1261d42cb4b42b9a66ca73cfd50244b1b0abae820742dc9ce62 10 restart_on_corruption ignore_zero_blocks use_fec_from_device /dev/mmcblk0p18 fec_roots 2 fec_blocks 375819 fec_start 375819'
[ 5.205678@3] device-mapper: init: dm-0 is ready
[ 5.211399@3] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities
[ 5.217588@3] EXT4-fs (dm-0): couldn't mount as ext2 due to feature incompatibilities
[ 5.227536@3] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 5.232238@3] VFS: Mounted root (ext4 filesystem) readonly on device 251:0.
[ 5.240541@3] devtmpfs: mounted
[ 5.243036@3] Freeing unused kernel memory: 1024K
[ 5.266793@3] init: init first stage started!
[ 5.267702@3] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 5.276679@3] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[ 5.329785@3] EXT4-fs (mmcblk0p17): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[ 5.334253@3] init: [libfs_mgr]__mount(source=/dev/block/odm,target=/odm,type=ext4)=0: Success
[ 5.348366@3] EXT4-fs (mmcblk0p19): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[ 5.352925@3] init: [libfs_mgr]__mount(source=/dev/block/product,target=/product,type=ext4)=0: Success
[ 5.366152@3] init: [libfs_mgr]Returning avb_handle with status: 0
[ 5.373600@3] init: [libfs_mgr]Loading verity table: '1 /dev/block/vendor /dev/block/vendor 4096 4096 32231 32231 sha1 f9782cb9c396a38520600227c68b542d16c09c75 5ae789189a69a1261d42cb4b42b9a66ca73cfd50244b1b0abae820742dc9ce62 10 use_fec_from_device /dev/block/vendor fec_roots 2 fec_blocks 32486 fec_start 32486 restart_on_corruption ignore_zero_blocks'
[ 5.408376@3] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1,inode_readahead_blks=8
[ 5.412347@3] init: [libfs_mgr]__mount(source=/dev/block/dm-1,target=/vendor,type=ext4)=0: Success
[ 5.421452@3] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[ 5.428552@3] init: Loading SELinux policy
[ 5.594012@2] audit: type=1403 audit(1420070416.252:2): policy loaded auid=4294967295 ses=4294967295
[ 5.598415@2] audit: type=1404 audit(1420070416.256:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 5.635456@2] init: 2 output lines suppressed due to ratelimiting
[ 5.638749@2] init: init second stage started!
[ 5.663948@2] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 5.671280@2] selinux: SELinux: Loaded file_contexts
[ 5.671280@2]
[ 5.672520@2] init: Running restorecon...
[ 5.684646@2] init: waitid failed: No child processes
[ 5.687898@3] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[ 5.698523@3] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[ 5.705500@3] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2367
[ 5.712346@3] init: Forked subcontext for 'u:r:vendor_init:s0' with pid 2368
[ 5.718933@3] init: Parsing file /init.rc...
[ 5.772870@3] eth0: device MAC address ec:5c:68:1d:bb:eb
[ 5.776850@0] ueventd: ueventd started!
[ 5.780742@0] selinux: SELinux: Loaded file_contexts
[ 5.780742@0]
[ 5.783056@0] ueventd: Parsing file /ueventd.rc...
[ 5.790108@0] ueventd: Parsing file /vendor/ueventd.rc...
[ 5.795127@0] ueventd: /vendor/ueventd.rc: 104: /sys/ lines must have 5 entries
[ 5.800537@0] ueventd: Parsing file /odm/ueventd.rc...
[ 5.805618@0] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 5.815500@0] ueventd: Parsing file /ueventd.amlogic.rc...
[ 5.820869@0] ueventd: Unable to read config file '/ueventd.amlogic.rc': open() failed: No such file or directory
[ 5.855800@3] meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[ 5.856945@3] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.868403@2] snd_soc_tlv320adc3101: loading out-of-tree module taints kernel.
[ 5.870581@2] tlv320 adc3101_i2c_probe ...
[ 5.874980@2] failed to get slot_number, set it default
[ 5.879329@2] adc3101_i2c_probe i2c:e8895a00
[ 5.883812@2] adc3101_i2c_probe 18 done
[ 5.888697@2] adc3101_codec_probe ...
[ 5.894445@2] adc3101_codec_probe done...
[ 5.901929@2] aml_pdm_probe
[ 5.907112@1] optee_armtz: initialized driver
[ 6.111852@2] aml_pdm_dai_probe
[ 6.111877@2] aml_dai_spdif_probe
[ 6.112660@2] aml_dai_spdif_probe
[ 6.115965@2] aml_dai_set_tdm_slot(), txmask(0xff), rxmask(0xff)
[ 6.122033@2] lanes_out_cnt(0), lanes_in_cnt(1)
[ 6.126533@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[ 6.131653@2] lanes_lb_cnt(0)
[ 6.134680@2] slots(8), slot_width(32)
[ 6.138502@2] asoc aml_dai_set_tdm_fmt, 0x4004, e8cad310, id(0), clksel(0)
[ 6.145346@2] master_mode(1), binv(0), finv(0) out_skew(2), in_skew(3)
[ 6.153599@2] asoc-aml-card auge_sound: multicodec <-> TDM-A mapping ok
[ 6.158456@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[ 6.164235@2] lanes_out_cnt(1), lanes_in_cnt(1)
[ 6.168831@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[ 6.173939@2] lanes_lb_cnt(0)
[ 6.176975@2] slots(2), slot_width(32)
[ 6.180790@2] [adc3101_set_dai_fmt]:slot_number=0
[ 6.190699@2] asoc aml_dai_set_tdm_fmt, 0x4001, e8cad250, id(1), clksel(1)
[ 6.192317@2] master_mode(1), binv(0), finv(1) out_skew(2), in_skew(3)
[ 6.200827@2] asoc-aml-card auge_sound: multicodec <-> TDM-B mapping ok
[ 6.205412@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[ 6.211212@2] lanes_out_cnt(0), lanes_in_cnt(1)
[ 6.215796@2] lanes_oe_out_cnt(1), lanes_oe_in_cnt(0)
[ 6.220917@2] lanes_lb_cnt(0)
[ 6.223941@2] slots(2), slot_width(32)
[ 6.227776@2] asoc aml_dai_set_tdm_fmt, 0x4001, e8cad190, id(2), clksel(2)
[ 6.234607@2] master_mode(1), binv(0), finv(1) out_skew(2), in_skew(3)
[ 6.242976@2] asoc-aml-card auge_sound: multicodec <-> TDM-C mapping ok
[ 6.247805@2] aml_pdm_pcm_new dai->name: ff642000.audiobus:pdm dai->id: 0
[ 6.256693@2] asoc-aml-card auge_sound: dummy <-> ff642000.audiobus:pdm mapping ok
[ 6.262000@2] set normal 512 fs /4 fs
[ 6.265661@2] set spdifout clk:6144000, mpll:24576000
[ 6.270834@2] get spdifout clk:6143997, mpll:24575987
[ 6.276040@2] aml_dai_set_spdif_fmt , fmt 0x4010
[ 6.280752@2] aml_spdif_new spdif_a, clk continuous:1
[ 6.285654@2] spdifout_play_with_zerodata_free, spdif id:0
[ 6.291729@2] asoc-aml-card auge_sound: dummy <-> SPDIF mapping ok
[ 6.297278@2] set normal 512 fs /4 fs
[ 6.300927@2] set spdifout clk:6144000, mpll:24576000
[ 6.306115@2] get spdifout clk:6143997, mpll:24575987
[ 6.311304@2] aml_dai_set_spdif_fmt , fmt 0x4010
[ 6.316006@2] aml_spdif_new spdif_b, clk continuous:1
[ 6.320930@2] spdifout_play_with_zerodata_free, spdif id:1
[ 6.326748@2] asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
[ 6.332747@2] aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[ 6.332917@3] ueventd: Coldboot took 0.497 seconds
[ 6.343329@2] lanes_out_cnt(0), lanes_in_cnt(0)
[ 6.346068@0] audit: type=1400 audit(1420070417.004:4): avc: denied { write } for pid=1 comm="init" name="alignment" dev="proc" ino=4026531964 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 6.367312@2] lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[ 6.372406@2] lanes_lb_cnt(1)
[ 6.375430@2] slots(2), slot_width(32)
[ 6.379275@2] asoc aml_dai_set_tdm_fmt, 0x4001, e8cad0d0, id(3), clksel(2)
[ 6.386102@2] master_mode(1), binv(0), finv(1) out_skew(2), in_skew(3)
[ 6.393593@2] asoc-aml-card auge_sound: dummy <-> TDMIN-LB mapping ok
[ 6.415229@2] snd_card_add_kcontrols card:d4ba2810
[ 6.415279@2] effect_v2 is not init
[ 6.417949@2] eq/drc v1 function enable
[ 6.428988@3] audit: type=1400 audit(1420070417.088:5): avc: denied { write } for pid=1 comm="init" name="panic" dev="proc" ino=14261 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 6.447879@2] set av out GPIOF_OUT_INIT_HIGH!
[ 6.456101@0] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 6.489048@0] scsi 0:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 6
[ 6.496830@2] sd 0:0:0:0: [sda] 14761984 512-byte logical blocks: (7.56 GB/7.04 GiB)
[ 6.500336@2] sd 0:0:0:0: [sda] Write Protect is off
[ 6.505317@2] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.514780@0] audit: type=1400 audit(1420070417.172:6): avc: denied { create } for pid=32 comm="kdevtmpfs" name="sda" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=0
[ 6.537852@2] sda: sda1
[ 6.538452@0] audit: type=1400 audit(1420070417.196:7): avc: denied { create } for pid=32 comm="kdevtmpfs" name="sda1" scontext=u:r:kernel:s0 tcontext=u:object_r:device:s0 tclass=blk_file permissive=0
[ 6.564888@2] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.595843@2] EXT4-fs (mmcblk0p22): recovery complete
[ 6.596205@2] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 7.171010@0] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[ 7.171010@0]
[ 7.171747@0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 7.171747@0]
[ 7.179481@0] e2fsck: Pass 2: Checking directory structure
[ 7.179481@0]
[ 7.186469@0] e2fsck: Pass 3: Checking directory connectivity
[ 7.186469@0]
[ 7.193871@0] e2fsck: Pass 4: Checking reference counts
[ 7.193871@0]
[ 7.200680@0] e2fsck: Pass 5: Checking group summary information
[ 7.200680@0]
[ 7.208383@0] e2fsck: /dev/block/data: 8117/270912 files (19.9% non-contiguous), 597157/1082364 blocks
[ 7.208383@0]
[ 7.220564@0] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option
[ 7.229671@0] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 7.238874@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[ 7.248759@3] EXT4-fs (mmcblk0p3): recovery complete
[ 7.249719@3] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 7.335477@0] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[ 7.335477@0]
[ 7.336239@0] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[ 7.336239@0]
[ 7.343905@0] e2fsck: Pass 2: Checking directory structure
[ 7.343905@0]
[ 7.351810@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[ 7.359710@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 7.370429@0] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 7.383815@3] EXT4-fs (mmcblk0p21): 1 orphan inode deleted
[ 7.383842@3] EXT4-fs (mmcblk0p21): recovery complete
[ 7.392389@2] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 7.451140@2] audit: type=1400 audit(1420070418.108:8): avc: denied { read } for pid=2888 comm="e2fsck" name="btv_home" dev="tmpfs" ino=12797 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 7.465962@2] audit: type=1400 audit(1420070418.124:9): avc: denied { read write } for pid=2888 comm="e2fsck" name="btv_home" dev="tmpfs" ino=12797 scontext=u:r:fsck:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 7.488795@0] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option
[ 7.495536@0] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 7.506659@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[ 7.516355@3] EXT4-fs (mmcblk0p13): recovery complete
[ 7.517533@3] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 7.577445@0] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[ 7.580117@0] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 7.634709@2] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[ 7.638000@2] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 7.649126@2] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
[ 7.658023@3] EXT4-fs (mmcblk0p15): recovery complete
[ 7.659866@3] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 7.724231@0] EXT4-fs (mmcblk0p15): Ignoring removed nomblk_io_submit option
[ 7.727036@0] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 7.737809@0] init: 35 output lines suppressed due to ratelimiting
[ 7.745255@3] zram0: detected capacity change from 0 to 268435456
[ 7.782508@3] mkswap: Swapspace size: 262140k, UUID=3c2f5692-6085-4731-9cc2-70943fe3de1c
[ 7.786143@3] Adding 262140k swap on /dev/block/zram0. Priority:-1 extents:1 across:262140k SS
[ 7.803026@3] register clk_set_setting cpu[40]
[ 7.811236@3] Registered firmware driver success.
[ 7.812807@3] Try to load video/h264_enc.bin ...
[ 7.816960@3] load firmware size : 76288, Name : video/h264_enc.bin.
[ 7.821353@3] the fw pack ver v0.0 is too lower.
[ 7.825942@3] it may work abnormally so need to be update in time.
[ 7.832612@3] Try to load video/video_ucode.bin ...
[ 7.845530@3] load firmware size : 992000, Name : video/video_ucode.bin.
[ 7.883922@3] Amlogic A/V streaming port init
[ 7.895322@3] get gate demux control ok d4a96a00
[ 7.895356@3] get gate parser_top control ok d4a96a80
[ 7.899371@3] get gate vdec control ok d4a96a40
[ 7.908669@3] get gate clk_81 control failed (null)
[ 7.908925@3] get gate clk_vdec_mux control ok e82cd780
[ 7.914390@3] get gate clk_hcodec_mux control ok e82cd800
[ 7.919558@3] get gate clk_hevc_mux control ok e82cd880
[ 7.924695@3] get gate clk_hevcb_mux control ok e82cd900
[ 7.929991@3] get gate ahbarb0 control ok e82cd580
[ 7.934703@3] get gate asyncfifo control failed (null)
[ 7.963226@3] ammvdec_h264 module init
[ 8.007098@3] ammvdec_mpeg12 module init
[ 8.017097@3] ammvdec_mpeg4_driver_init_module
[ 8.051103@3] amvenc_avc_probe -- reserved memory config fail.
[ 8.051291@3] amvenc_avc - cma memory pool size: 60 MB
[ 8.056469@3] encode_wq_init.
[ 8.059350@3] encode start monitor.
[ 8.062892@1] encode workqueue monitor start.
[ 8.072000@3] vpu_init
[ 8.072227@3] vpu_probe
[ 8.072240@3] HevcEnc reserved memory config fail.
[ 8.076709@3] HevcEnc - cma memory pool size: 64 MB
[ 8.081582@3] HevcEnc - wave420l_irq: 58
[ 8.085486@3] vpu base address get from platform driver physical base addr=0xff610000, virtual base=0xf236c000
[ 8.096697@3] success to probe vpu device with video memory from cma
[ 8.126316@1] audit: type=1400 audit(1420070418.784:10): avc: denied { setattr } for pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532011 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 8.140716@1] audit: type=1400 audit(1420070418.800:11): avc: denied { setattr } for pid=1 comm="init" name="slabinfo" dev="proc" ino=4026532011 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 8.178522@0] logd.auditd: start
[ 8.178566@0] logd.klogd: 8134800378
[ 8.219377@0] binder: 2989:2989 ioctl 4018620d bec7ca00 returned -22
MESSAGE: USER-TA:log_msg:70: KeymasterTA (info): app/ipc/keymaster_ipc.cpp, Line 752: Amlogic KEYMASTER 2.0! Build Time: Jun 19 2018 14:46:55
[ 8.394291@3] type=1400 audit(1420070419.052:12): avc: denied { setattr } for pid=2367 comm="init" name="media" dev="mmcblk0p22" ino=51 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=0
[ 8.420802@2] mali ffe40000.bifrost: Continuing without Mali regulator control
[ 8.422447@2] mali ffe40000.bifrost: max pp is 2
[ 8.427003@2] mali ffe40000.bifrost: set min pp to default 1
[ 8.432619@2] mali ffe40000.bifrost: min pp is 1
[ 8.437264@2] mali ffe40000.bifrost: set min clk default to 0
[ 8.442933@2] mali ffe40000.bifrost: min clk is 0
[ 8.447707@2] mali ffe40000.bifrost: hiu io source 0xf12fe000
[ 8.453516@2] mali ffe40000.bifrost: hiu io source 0xf285d000
[ 8.459332@2] mali ffe40000.bifrost: num of pp used most of time 1
[ 8.465466@2] mali ffe40000.bifrost: clock dvfs cfg table size is 6
[ 8.471790@2] mali ffe40000.bifrost: max clk set 4
[ 8.476469@2] mali ffe40000.bifrost: max clk is 4
[ 8.481240@2] mali ffe40000.bifrost: turbo clk set to 5
[ 8.486434@2] mali ffe40000.bifrost: turbo clk is 5
[ 8.491379@2] mali ffe40000.bifrost: default clk set to 4
[ 8.496747@2] mali ffe40000.bifrost: default clk is 4
[ 8.501866@2] mali ffe40000.bifrost: ====================0====================
[ 8.501866@2] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 190>, clk_sample=285
[ 8.519807@2] mali ffe40000.bifrost: ====================1====================
[ 8.519807@2] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[ 8.537751@2] mali ffe40000.bifrost: ====================2====================
[ 8.537751@2] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<180 220>, clk_sample=500
[ 8.555684@2] mali ffe40000.bifrost: ====================3====================
[ 8.555684@2] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<210 236>, clk_sample=666
[ 8.573629@2] mali ffe40000.bifrost: ====================4====================
[ 8.573629@2] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
[ 8.591564@2] mali ffe40000.bifrost: ====================5====================
[ 8.591564@2] clk_freq= 846000000, clk_parent= gp0_pll, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=846
[ 8.609505@2] mali ffe40000.bifrost: clock dvfs table size is 6
[ 8.615610@2] mali_plat=bf2932d8
[ 8.618895@2] find tzd id: 0
[ 8.621549@2] gpu cooling register okay with err=0
[ 8.626481@2] find tzd id: 0
[ 8.629142@2] gpu core cooling register okay with err=0
[ 8.634322@2] shader_present=1, tiler_present=1, l2_present=1
[ 8.640087@2] Mali_pwr_on:gpu_irq : 200
[ 8.644050@2] hrtimer: interrupt took 13458 ns
[ 8.648532@2] mali ffe40000.bifrost: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
[ 8.657965@3] mali ffe40000.bifrost: Probed as mali0
[ 8.673034@3] ATBM: register atbm8881 demod driver
[ 8.682618@3] aml dvb init
[ 8.690995@3] atvr_init: succeeded creating misc device snd_atvr_pcm
[ 8.691936@3] atvr_init: succeeded creating misc device snd_atvr_adpcm
[ 8.698416@2] atvr_init: succeeded creating misc device snd_atvr_msbc
[ 8.714125@2] meson-remote: Driver init
[ 8.714396@2] meson-remote: remote_probe
[ 8.716303@2] meson-remote ff808040.rc: protocol = 0x1
[ 8.721374@2] meson-remote ff808040.rc: led_blink = 1
[ 8.726386@2] meson-remote ff808040.rc: led_blink_frq = 100
[ 8.732054@2] meson-remote ff808040.rc: platform_data irq =44
[ 8.737767@2] meson-remote ff808040.rc: custom_number = 3
[ 8.743109@2] meson-remote ff808040.rc: ptable->map_size = 214
[ 8.748915@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-1
[ 8.756102@2] meson-remote ff808040.rc: ptable->custom_code = 0x7f80
[ 8.762449@2] meson-remote ff808040.rc: ptable->release_delay = 80
[ 8.768688@2] meson-remote ff808040.rc: ptable->map_size = 214
[ 8.774391@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-2
[ 8.781578@2] meson-remote ff808040.rc: ptable->custom_code = 0xa0f5
[ 8.787910@2] meson-remote ff808040.rc: ptable->release_delay = 80
[ 8.794164@2] meson-remote ff808040.rc: ptable->map_size = 17
[ 8.799783@2] meson-remote ff808040.rc: ptable->custom_name = amlogic-remote-3
[ 8.806971@2] meson-remote ff808040.rc: ptable->custom_code = 0xbd02
[ 8.813303@2] meson-remote ff808040.rc: ptable->release_delay = 80
[ 8.819454@2] meson-remote ff808040.rc: default protocol = 0x1 and id = 0
[ 8.826215@2] meson-remote ff808040.rc: reg=0x0, val=0x1f40190
[ 8.832017@2] meson-remote ff808040.rc: reg=0x4, val=0x12c00c8
[ 8.837827@2] meson-remote ff808040.rc: reg=0x8, val=0x960050
[ 8.843558@2] meson-remote ff808040.rc: reg=0xc, val=0x480028
[ 8.849269@2] meson-remote ff808040.rc: reg=0x10, val=0x70fa0013
[ 8.855245@2] meson-remote ff808040.rc: reg=0x18, val=0x8616800
[ 8.861142@2] meson-remote ff808040.rc: reg=0x1c, val=0x9f00
[ 8.866775@2] meson-remote ff808040.rc: reg=0x20, val=0x0
[ 8.872149@2] meson-remote ff808040.rc: reg=0x24, val=0x0
[ 8.877520@2] meson-remote ff808040.rc: reg=0x28, val=0x0
[ 8.883967@0] input: aml_keypad as /devices/platform/ff808040.rc/input/input1
[ 8.894157@0] gpio-keypad gpio_keypad: ch+ key(402) registed.
[ 8.895714@0] gpio-keypad gpio_keypad: ch- key(403) registed.
[ 8.901650@0] input: gpio_keypad as /devices/platform/gpio_keypad/input/input2
[ 8.967379@1] logd.daemon: reinit
[ 9.121952@3] type=1400 audit(1420070419.052:12): avc: denied { setattr } for pid=2367 comm="init" name="media" dev="mmcblk0p22" ino=51 scontext=u:r:vendor_init:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=dir permissive=0
the package has 43 fws totally.
the fw with 504 KB will be loaded.
[ 9.194670@3] usbcore: registered new interface driver btusb
[ 9.441593@2] hdmitx: system: set hdcp_pwr 1
[ 9.442838@2] healthd: BatteryTemperaturePath not found
[ 9.442845@2] healthd: BatteryCycleCountPath not found
[ 9.446909@2] android.hardware.health@2.0-impl: wakealarm_init: timerfd_create failed
[ 9.448167@2] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[ 9.493561@1] unifykey: amlkey_init_gen() enter!
[ 9.494416@3] hdmitx: system: restore hdcp_pwr 0
[ 9.494485@3] amhdmitx amhdmitx0: hdmitx20: stop14
[ 9.494616@3] amhdmitx amhdmitx0: hdmitx20: stop22
[ 9.495348@1] emmc_key_read:114, read ok
[ 9.495361@1] unifykey: amlkey_init_gen() storagekey_info.buffer=c5080000, storagekey_info.size = 40000!
[ 9.504099@1] vfm_map_store:rm default
[ 9.505509@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 9.544679@1] fb: osd_open, 1489, fb_index=0,fb_rmem_size=26738688
[ 9.544827@1] fb: osd_open, 1489, fb_index=0,fb_rmem_size=26738688
[ 9.544855@1] fb: osd_open, 1489, fb_index=1,fb_rmem_size=1048576
[ 9.544885@1] fb: osd_open, 1489, fb_index=2,fb_rmem_size=1048576
[ 9.545000@1] fb: vpu clkc clock is 199 MHZ
[ 9.545007@1] vpu: switch_vpu_mem_pd: unsupport vpu mod: 52
[ 9.545012@1] fb: osd_open, 1489, fb_index=3,fb_rmem_size=8388608
[ 9.551498@2] hdmitx: system: sname = 2160p60hz
[ 9.551501@2] hdmitx: system: char_clk = 594000
[ 9.551502@2] hdmitx: system: cd = 6
[ 9.551503@2] hdmitx: system: cs = 3
[ 9.551507@2] hdmitx: RX tmds clk: 600 Calc clk: 445
[ 9.591349@2] file system registered
[ 9.697183@1] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
[ 9.697187@1] audit: rate limit exceeded
[ 9.699423@1] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
[ 9.709251@1] assign_ffs_buffer FFS_BUFFER_MAX=100!!!
[ 9.709328@1] ffs_data_put(): freeing
[ 9.726281@2] type=1400 audit(1420070419.780:13): avc: denied { setattr } for pid=2367 comm="init" name="bluetooth" dev="mmcblk0p22" ino=127497 scontext=u:r:vendor_init:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=0
[ 9.747581@2] type=1400 audit(1420070419.780:13): avc: denied { setattr } for pid=2367 comm="init" name="bluetooth" dev="mmcblk0p22" ino=127497 scontext=u:r:vendor_init:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=0
[ 9.768384@2] type=1400 audit(1420070420.164:14): avc: denied { write } for pid=2367 comm="init" name="dmesg_restrict" dev="proc" ino=1830 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_security:s0 tclass=file permissive=0
[ 9.802283@1] amlogic-new-usb3-v2 ffe09080.usb3phy: set to host mode
[ 9.803986@1] amlogic-new-usb3-v2 ffe09080.usb3phy: set to host mode
console:/ $ [ 9.949807@2] read descriptors
[ 9.950101@2] read strings
[ 9.960220@3] meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 9.963716@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.102808@2]
[ 10.102808@2] [amvideo..] saturation_post:16 hue_post:0 mab:1200000
[ 10.201153@1] vout: vout_io_open
[ 10.201186@1] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
[ 10.204337@1] vout: vout_io_release
[ 10.335510@0] fb: afbc: 1
[ 10.335534@0] fb: afbc_type=2,enable=1
[ 10.451712@0] cectx ff80023c.aocec: init_cec_port_info phy_addr:2000, port num:1
[ 10.453600@0] cectx ff80023c.aocec: port_seq=0x0
[ 10.466743@0] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:2100,type:0
[ 10.783328@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobus:tdmlb
[ 10.786044@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus:tdmlb
[ 10.793854@2] aml_spdif_open
[ 10.796131@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobus:spdif
[ 10.804067@2] aml_spdif_close
[ 10.806600@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus:spdif
[ 10.816470@2] aml_pdm_open, stream:1
[ 10.817702@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobus:pdm
[ 10.826098@2] enter aml_pdm_close type: 1
[ 10.829713@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus:pdm
[ 10.837279@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobus:tdmc
[ 10.844627@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus:tdmc
[ 10.854341@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobus:tdmb
[ 10.859638@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus:tdmb
[ 10.867410@2] audio_ddr_mngr: toddrs[0] registered by device ff642000.audiobus:tdma
[ 10.874696@2] audio_ddr_mngr: toddrs[0] released by device ff642000.audiobus:tdma
[ 10.925939@0] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[ 10.994351@1] audio_ddr_mngr: frddrs[0] registered by device ff642000.audiobus:tdmc
[ 10.997411@1] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
[ 11.005328@1] asoc aml_dai_set_tdm_fmt, 0x4001, e8cad190, id(2), clksel(2)
[ 11.011940@1] master_mode(1), binv(0), finv(1) out_skew(2), in_skew(3)
[ 11.017590@1] dump_pcm_setting(e8cad190)
[ 11.021148@1] pcm_mode(1)
[ 11.023710@1] sysclk(12288000)
[ 11.026984@1] sysclk_bclk_ratio(4)
[ 11.030460@1] bclk(3072000)
[ 11.033298@1] bclk_lrclk_ratio(64)
[ 11.036628@1] lrclk(48000)
[ 11.039352@1] tx_mask(0x3)
[ 11.047079@0] rx_mask(0x3)
[ 11.047102@0] slots(2)
[ 11.047335@0] slot_width(32)
[ 11.050435@0] lane_mask_in(0x2)
[ 11.053620@0] lane_mask_out(0x0)
[ 11.056819@0] lane_oe_mask_in(0x0)
[ 11.060300@0] lane_oe_mask_out(0x1)
[ 11.064019@0] lane_lb_mask_in(0x0)
[ 11.067301@0] set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
[ 11.074779@0] aml_dai_set_bclk_ratio, select I2S mode
[ 11.079902@0] samesource sysclk:24576000
[ 11.114135@1] avc open
[ 11.114160@1] amvenc_avc check CMA pool success, max instance: 3.
[ 11.118489@1] allocating phys 0x30000000, size 20480k, wq:e6941a00.
[ 11.151835@0] amvenc_avc memory config success, buff start:0x30000000, size is 0x1400000, wq:e6941a00.
[ 11.155687@0] avc release, wq:e6941a00
[ 11.167803@0] remove encode_work_queue e6941a00 success, _destroy_encode_work_queue line 3502.
[ 11.171312@0] [+] vpu_open
[ 11.198679@3] allocating phys 0x30000000, virt addr 0x0, size 65536k
[ 11.199689@3] [-] vpu_open, ret: 0
[ 11.202866@3] vpu_release
[ 11.206063@3] vpu_free_buffers
[ 11.208668@3] vpu_free_instances
[ 11.215267@3] vpu_release, s_video_memory 0x30000000
[ 11.335804@0] vout: aml_tvout_mode_work: monitor_timeout
[ 12.118330@3] audit_log_lost: 2 callbacks suppressed
[ 12.118335@3] audit: audit_lost=23 audit_rate_limit=5 audit_backlog_limit=64
[ 12.124780@3] audit: rate limit exceeded
[ 12.536292@1] fb: free_scale_switch to fb0, mode: 0x10001
[ 12.536346@1] fb: set logo loaded
[ 13.131908@1] audit: audit_lost=29 audit_rate_limit=5 audit_backlog_limit=64
[ 13.133761@1] audit: rate limit exceeded
[ 13.635827@3] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[ 14.840691@3] type=1400 audit(1420070424.400:70): avc: denied { read } for pid=3083 comm="systemcontrol" name="u:object_r:default_prop:s0" dev="tmpfs" ino=12637 scontext=u:r:system_control:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0 duplicate messages suppressed
[ 14.861991@3] type=1400 audit(1420070425.500:71): avc: denied { read } for pid=3083 comm="systemcontrol" name="u:object_r:system_prop:s0" dev="tmpfs" ino=12695 scontext=u:r:system_control:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=0
[ 14.885550@0] hdmitx: system: set hdcp_pwr 1
[ 14.887150@3] type=1400 audit(1420070425.500:71): avc: denied { read } for pid=3083 comm="systemcontrol" name="u:object_r:system_prop:s0" dev="tmpfs" ino=12695 scontext=u:r:system_control:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=0
[ 14.908803@3] type=1400 audit(1420070425.500:72): avc: denied { read } for pid=3083 comm="systemcontrol" name="u:object_r:default_prop:s0" dev="tmpfs" ino=12637 scontext=u:r:system_control:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0
[ 14.929997@0] hdmitx: system: restore hdcp_pwr 0
[ 14.930097@0] amhdmitx amhdmitx0: hdmitx20: stop14
[ 14.930294@0] amhdmitx amhdmitx0: hdmitx20: stop22
[ 14.936699@0] hdmitx: system: hdcp: set mode as 2
[ 14.971977@1] early_suspend_state=0
[ 15.027203@0] the esm code address is f85a0000
[ 15.027416@0] the esm data address is f85d1000
[ 15.030798@0] info.hpi_base = 0xffe01000 region_name:ESM-FFE01000
[ 15.036817@0] esm data = f85d1000 size:131072
[ 15.046272@0] hdmitx: system: irq 80000008 0
[ 15.046311@0] hdmitx: hw: hdcp22: Nonce HW Vld: 1
[ 15.850415@1] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[ 16.099185@1] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[ 16.101967@1] healthd: battery l=42 v=4 t=42.4 h=2 st=2 c=1 fc=10000000 chg=u
[ 16.363642@3] type=1400 audit(1420070425.500:72): avc: denied { read } for pid=3083 comm="systemcontrol" name="u:object_r:default_prop:s0" dev="tmpfs" ino=12637 scontext=u:r:system_control:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=0
[ 16.382379@3] type=1400 audit(1420070427.020:73): avc: denied { write } for pid=1 comm="init" name="swappiness" dev="proc" ino=19675 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 16.999485@3] hdmitx: store_avmute -1
[ 16.999522@3] hdmitx: hw: avmute set to 1
[ 17.159497@1] hdmitx: hdmitx: set hdcp22 content type 1
[ 17.195294@3] cectx ff80023c.aocec: init_cec_port_info phy_addr:2000, port num:1
[ 17.197072@3] cectx ff80023c.aocec: port_seq=0x0
[ 17.201917@3] cectx ff80023c.aocec: portinfo id:0 arc:0 phy:2100,type:0
[ 17.599894@3] sdcardfs version 2.0
[ 17.599929@3] sdcardfs: dev_name -> /data/media
[ 17.603505@3] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,default_normal,mask=6,userid=0,gid=1015
[ 17.614404@3] sdcardfs: mnt -> e5b55710
[ 17.617500@3] sdcardfs: mounted on top of /data/media type ext4
[ 17.628960@3] Remount options were mask=23,gid=9997 for vfsmnt e5b55a10.
[ 17.630048@3] sdcardfs : options - debug:1
[ 17.637352@3] sdcardfs : options - gid:9997
[ 17.638367@3] sdcardfs : options - mask:23
[ 17.643415@3] Remount options were mask=7,gid=9997 for vfsmnt e74c0910.
[ 17.649742@3] sdcardfs : options - debug:1
[ 17.657517@3] sdcardfs : options - gid:9997
[ 17.657544@3] sdcardfs : options - mask:7
Playready TA Start
Playready TA Exit!
Playready TA_DestroyEntryPoint!
[ 18.108310@0] binder: unexpected work type, 4, not freed
[ 18.108346@0] binder: undelivered TRANSACTION_COMPLETE
[ 18.113211@0] binder: undelivered transaction 7144, process died.
[ 18.589792@2] ion_dev soc:ion_dev: Fail to allocate buffer
[ 18.711301@0] BT_RADIO going: on
[ 18.711328@0] AML_BT: going ON
[ 18.912405@1] input: virtual-search as /devices/virtual/input/input3
[ 19.069999@1] sdcardfs version 2.0
[ 19.070111@1] sdcardfs: dev_name -> /mnt/media_rw/sdcard3
[ 19.074347@1] sdcardfs: options -> fsuid=1023,fsgid=1023,mask=6,userid=0,gid=1015
[ 19.082117@1] sdcardfs: mnt -> e5c2dc10
[ 19.087190@1] sdcardfs: mounted on top of /mnt/media_rw/sdcard3 type fuseblk
[ 19.100332@1] Remount options were mask=18,gid=9997 for vfsmnt e689f210.
[ 19.102991@1] sdcardfs : options - debug:1
[ 19.107082@1] sdcardfs : options - gid:9997
[ 19.111930@2] sdcardfs : options - mask:18
[ 19.114577@2] Remount options were mask=18,gid=9997 for vfsmnt e5cfc810.
[ 19.122018@2] sdcardfs : options - debug:1
[ 19.125501@2] sdcardfs : options - gid:9997
[ 19.131207@2] sdcardfs : options - mask:18
[ 19.133036@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 0 to 9600
[ 19.133102@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 9600
[ 19.133120@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 9600 to 115200
[ 19.149417@0] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[ 19.262212@2] type=1400 audit(1420070427.020:73): avc: denied { write } for pid=1 comm="init" name="swappiness" dev="proc" ino=19675 scontext=u:r:init:s0 tcontext=u:object_r:proc:s0 tclass=file permissive=0
[ 19.424802@2] type=1400 audit(1571036544.788:74): avc: denied { search } for pid=3840 comm="compare_upgrade" name="/" dev="sda1" ino=5 scontext=u:r:compare_upgrade:s0 tcontext=u:object_r:fuseblk:s0 tclass=dir permissive=0
[ 19.455006@2] type=1400 audit(1571036544.788:74): avc: denied { search } for pid=3840 comm="compare_upgrade" name="/" dev="sda1" ino=5 scontext=u:r:compare_upgrade:s0 tcontext=u:object_r:fuseblk:s0 tclass=dir permissive=0
[ 19.473564@2] type=1400 audit(1571036544.936:75): avc: denied { search } for pid=3844 comm="usbrun" name="/" dev="sda1" ino=5 scontext=u:r:usbrun:s0 tcontext=u:object_r:fuseblk:s0 tclass=dir permissive=0
[ 19.510312@1] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 2000000 to 115200
[ 19.530230@1] ion_dev soc:ion_dev: Fail to allocate buffer
[ 19.635334@1] ion_dev soc:ion_dev: Fail to allocate buffer
[ 19.697408@1] ion_dev soc:ion_dev: Fail to allocate buffer
[ 19.722779@3] meson_uart ffd24000.serial: ttyS1 use xtal(24M) 24000000 change 115200 to 2000000
[ 20.301163@3] type=1400 audit(1571036545.124:77): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=19267 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 20.328437@0] type=1400 audit(1571036545.828:78): avc: denied { read write } for pid=3295 comm="applypatch" name="recovery" dev="tmpfs" ino=127 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 26.590043@2] selinux: SELinux: Skipping restorecon_recursive(/data/system_ce/0)
[ 26.590043@2]
[ 26.748477@3] selinux: SELinux: Skipping restorecon_recursive(/data/misc_ce/0)
[ 26.748477@3]
[ 26.999381@2] type=1400 audit(1571036545.828:78): avc: denied { read write } for pid=3295 comm="applypatch" name="recovery" dev="tmpfs" ino=127 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
[ 27.017257@2] type=1400 audit(1571036552.524:79): avc: denied { search } for pid=3098 comm="memtrack@1.0-se" name="3084" dev="proc" ino=13073 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=0
[ 27.215073@1] type=1400 audit(1571036552.524:79): avc: denied { search } for pid=3098 comm="memtrack@1.0-se" name="3084" dev="proc" ino=13073 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=0
[ 27.239162@1] type=1400 audit(1571036552.740:80): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=788 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 27.404404@1] type=1400 audit(1571036552.740:80): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=788 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 27.420733@1] type=1400 audit(1571036552.932:81): avc: denied { search } for pid=3098 comm="memtrack@1.0-se" name="3198" dev="proc" ino=15600 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:statsd:s0 tclass=dir permissive=0
[ 27.460288@1] type=1400 audit(1571036552.932:81): avc: denied { search } for pid=3098 comm="memtrack@1.0-se" name="3198" dev="proc" ino=15600 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:statsd:s0 tclass=dir permissive=0
[ 27.475885@2] type=1400 audit(1571036552.932:82): avc: denied { search } for pid=3098 comm="memtrack@1.0-se" name="3202" dev="proc" ino=15165 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:storaged:s0 tclass=dir permissive=0
[ 27.549698@0] type=1400 audit(1571036552.932:82): avc: denied { search } for pid=3098 comm="memtrack@1.0-se" name="3202" dev="proc" ino=15165 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:storaged:s0 tclass=dir permissive=0
[ 27.644487@1] audit: audit_lost=34 audit_rate_limit=5 audit_backlog_limit=64
[ 27.645944@1] audit: rate limit exceeded
[ 28.657053@2] init: No such service 'wpa_supplicant' for ctl.start
[ 29.629847@0] audio_dsp: dts_dec_control/0x0
[ 29.684233@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 29.684863@1] audio_dsp: last mode 0,now 0
[ 32.205235@2] input: anymote as /devices/virtual/input/input4
[ 32.930919@0]
[ 32.930919@0] [amvideo..] saturation_post:16 hue_post:0 mab:1200000
[ 32.950061@0]
[ 32.950061@0] [amvideo..] saturation_post:16 hue_post:0 mab:1200000
OEMCrypto_GetOEMPublicCertificate: Provisioning method = 2.
OEMCrypto_GetOEMPublicCertificate: Provisioning method = 2.
OEMCrypto_GetOEMPublicCertificate: Provisioning method = 2.
[ 37.267734@0] binder_alloc: 3697: binder_alloc_buf size 1056768 failed, no address space
[ 37.271808@0] binder_alloc: allocated: 10896 (num: 19 largest: 3152), free: 1029488 (num: 4 largest: 1029200)
[ 37.283796@0] binder: 3972:4265 transaction failed 29201/-28, size 1056768-0 line 3136
OEMCrypto_GetOEMPublicCertificate: Provisioning method = 2.
[ 37.926897@0] type=1400 audit(1571036555.568:90): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=19267 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 37.979908@0] type=1400 audit(1571036563.452:91): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=32739 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 39.369066@2] type=1400 audit(1571036563.452:91): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=32739 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 39.483905@1] type=1400 audit(1571036564.896:92): avc: denied { read } for pid=5381 comm="IntentService[D" name="type" dev="sysfs" ino=15323 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
[ 39.550108@1] type=1400 audit(1571036564.896:92): avc: denied { read } for pid=5381 comm="IntentService[D" name="type" dev="sysfs" ino=15323 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
[ 39.586427@1] type=1400 audit(1571036564.932:93): avc: denied { read } for pid=5381 comm="IntentService[D" name="stat" dev="proc" ino=17838 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=file permissive=0
[ 39.856954@2] type=1400 audit(1571036564.932:93): avc: denied { read } for pid=5381 comm="IntentService[D" name="stat" dev="proc" ino=17838 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=file permissive=0
[ 40.111182@2] type=1400 audit(1571036565.384:94): avc: denied { read } for pid=5381 comm="Binder:5381_5" name="stat" dev="proc" ino=17838 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=file permissive=0
[ 40.239505@2] type=1400 audit(1571036565.384:94): avc: denied { read } for pid=5381 comm="Binder:5381_5" name="stat" dev="proc" ino=17838 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=file permissive=0
[ 43.064711@2] spdif_a fifo ctrl, frddr:0 type:1, 16 bits
[ 43.064749@2] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[ 43.077647@2] hdmitx: system: sname = 2160p60hz
[ 43.077650@2] hdmitx: system: char_clk = 594000
[ 43.077652@2] hdmitx: system: cd = 5
[ 43.077653@2] hdmitx: system: cs = 3
[ 43.077656@2] hdmitx: RX tmds clk: 600 Calc clk: 371
[ 43.095203@3] audio_ddr_mngr: aml_frddr_select_dst_ss sel:1, dst_src:3
[ 43.125357@3] spdif_a is set to enable
[ 43.125400@3] asoc-aml-card auge_sound: tdm playback enable
[ 44.010263@1] is_reset=0
[ 44.010307@1] vdec_init, dev_name:ammvdec_h264, vdec_type=VDEC_TYPE_FRAME_BLOCK
[ 44.041996@1] H264 sysinfo: 1920x1080 duration=3200, pts_outside=1
[ 44.044015@1] [TEE], the fw (h264_multi) will be loaded.
[ 44.057554@1] di:ch[0]:di_receiver_event_fun,8:_REG
[ 44.057683@1] di:reg:amlvideo
[ 44.060840@1] di:ch[0]:reg end
[ 44.072766@1] di:ch[0]:di_receiver_event_fun,3:_START
[ 44.435606@3] spdif_a is set to disable
[ 44.435647@3] asoc-aml-card auge_sound: tdm playback stop
[ 44.439676@3] spdif_a fifo ctrl, frddr:0 type:1, 16 bits
[ 44.467041@3] spdif_info: rate: 48000, channel status ch0_l:0x100, ch0_r:0x100, ch1_l:0x200, ch1_r:0x200
[ 44.471305@3] audio_ddr_mngr: aml_frddr_select_dst_ss sel:1, dst_src:3
[ 44.479613@2] dip_init_value_reg:
[ 44.480752@2] DI 1920x1080-0x9000.
[ 44.484208@2] di_reg_setting:ch[0]:for first ch reg:
[ 44.484266@3] spdif_a is set to enable
[ 44.484287@3] asoc-aml-card auge_sound: tdm playback enable
[ 44.494037@0] video first pts = 2cad7
[ 44.494341@0]
[ 44.494341@0] [amvideo..] saturation_pre:0 hue_pre:0 mab:1000000
[ 44.509735@2] di_post_reset
[ 44.512486@2] 0x0000003b:Y=3b,U=0,V=0
[ 44.516077@2] nr_ds_init alloc nrds canvas 59.
[ 44.520525@2] [pps] pre input 0 0 output 0 0.
[ 44.545161@3] omx_need_drop_frame_num 0
[ 44.611102@2] type=1400 audit(1571036567.664:97): avc: denied { write } for pid=5791 comm="asott.attdaemon" name="com.vasott.attdaemon-Y334AEq0sJ9pF5SwJuydAg==" dev="mmcblk0p22" ino=130552 scontext=u:r:system_app:s0 tcontext=u:object_r:apk_data_file:s0 tclass=dir permissive=0
[ 44.633824@2] type=1400 audit(1571036570.136:98): avc: denied { read } for pid=5381 comm="Binder:5381_1" name="stat" dev="proc" ino=17838 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=file permissive=0
[ 47.958274@3] type=1400 audit(1571036570.136:98): avc: denied { read } for pid=5381 comm="Binder:5381_1" name="stat" dev="proc" ino=17838 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:r:zygote:s0 tclass=file permissive=0
[ 47.975409@3] type=1400 audit(1571036573.484:99): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=32739 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 53.432023@3] type=1400 audit(1571036573.484:99): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=32739 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 53.448327@3] type=1400 audit(1571036578.956:100): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=20093 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 57.722717@3] type=1400 audit(1571036578.956:100): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=20093 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 57.738720@3] type=1400 audit(1571036583.248:101): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=19267 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 62.471784@0] fb: mem_free_work, free memory: addr:800000
[ 65.718098@3] type=1400 audit(1571036583.248:101): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=19267 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
[ 65.735801@3] type=1400 audit(1571036591.244:102): avc: denied { read } for pid=3098 comm="memtrack@1.0-se" name="mem_profile" dev="debugfs" ino=40337 scontext=u:r:hal_memtrack_default:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=0
|
|
|
Hi Yoon , I can't find Eagle box enter recovery mode to upgrade fw in CAPTURE_error.TXT. How do you test for upgrade NTFS ? I also check with CAPTURE_Normal.TXT and Eagle box enter recovery mode. So i think it's ok for upgrade NTFS. |
|
|
Hi Mr. Jerry Lin, The method to Upgrade test is as follows. 1. Format USB Driver to NTFS. 2. Copy Firmware to USB Driver. But this firmware should not same version in the STB. 3. Insert USB Driver to STB. 4. Power ON(not Standby on from the Standby off) 5. Then STB detect SW firmware and start upgrade. Using NTFS USB Drv. didn't start upgrade process. TV Storm said that it may detect USB later than other USB that has different file system, such as FAT32. Could you check that the time difference of USB dectection time between NTFS and FAT32 ? |
|
|
Hi Mr SY Yoon, I think this is sepolicy issue. Maybe TV Storm needs to change permissions(sepolicy) to read fw version from NTFS USB. The error log is as follow: [ 19.424802@2] type=1400 audit(1571036544.788:74): avc: denied { search } for pid=3840 comm="compare_upgrade" name="/" dev="sda1" ino=5 scontext=u:r:compare_upgrade:s0 tcontext=u:object_r:fuseblk:s0 tclass=dir permissive=0 [ 19.455006@2] type=1400 audit(1571036544.788:74): avc: denied { search } for pid=3840 comm="compare_upgrade" name="/" dev="sda1" ino=5 scontext=u:r:compare_upgrade:s0 tcontext=u:object_r:fuseblk:s0 tclass=dir permissive=0 [ 19.473564@2] type=1400 audit(1571036544.936:75): avc: denied { search } for pid=3844 comm="usbrun" name="/" dev="sda1" ino=5 scontext=u:r:usbrun:s0 tcontext=u:object_r:fuseblk:s0 tclass=dir permissive=0 |
|
|
hi jerry Because NTFS USB has compatibility issues with other existing models (SELinux permissive mode), SKB is using only FAT for USB Upgrade. so this mantis is closed. Thanks. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2019-10-14 15:34 |
|
New Issue | |
| 2019-10-14 15:34 |
|
Status | new => assigned |
| 2019-10-14 15:34 |
|
Assigned To | => (SW) Kerwin Chen |
| 2019-10-14 15:35 |
|
Issue Monitored: (ALTech) SY Yoon | |
| 2019-10-14 15:51 | (SW) Kerwin Chen | Assigned To | (SW) Kerwin Chen => (SW) Jerry Lin |
| 2019-10-14 16:44 | (ALTech) SY Yoon | File Added: CAPTURE_Normal.TXT | |
| 2019-10-14 16:44 | (ALTech) SY Yoon | File Added: CAPTURE_error.TXT | |
| 2019-10-14 16:44 | (ALTech) SY Yoon | Note Added: 0003091 | |
| 2019-10-14 20:11 | (SW) Jerry Lin | Note Added: 0003092 | |
| 2019-10-15 08:19 | (ALTech) SY Yoon | Note Added: 0003093 | |
| 2019-10-15 15:36 | (SW) Jerry Lin | Note Added: 0003099 | |
| 2019-10-17 17:07 |
|
Note Added: 0003114 | |
| 2019-10-17 17:08 |
|
Status | assigned => resolved |
| 2019-10-17 17:08 |
|
Resolution | open => not a bug |
| 2021-12-23 17:23 | (SW) Jacky Chiang | Status | resolved => closed |
